Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter

Please plug antenna before powering up, otherwise static electricity will damage the product. Specification: power supply: DC 12V Working Frequency: 5. 8ghz sensitivity: ≤-90 dbm type standard: ntsc/pal consumption current: 200ma, max receiver connector: RP SMA female Antenna connector: RP SMA male Available Channel: 40CH Antenna Gain: 2dbi Audio Carrier: 6.

5mhz audio output Level: 1. 0 vp-p typ 10 k ohm antenna impedance: 50 ohm antenna input impedance: 50 Ohm TYP Video impedance: 75 Ohm Video Format : NTSC/PAL Video Output Level: 1. 0 vp-p typ 75 ohm dimension: 80x65x15mm Weight: 85g Dimension L×W×H: 3. 15×2. 56×059 inches package: 1 x WR832 5. 8ghz 40ch fpv receiver 1 x antenna 1 x power cable 1 x av cable 1 x User manual Notice: Please get a 12V lipo battery for the receiver.

We do not suggest over-voltage battery or car battery. Two switching buttons: easy to change frequency channels and bands. Power off memory: Replay the very last frequency band and channel. Long range more than 2km range in the open area - Plug and play.

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 48CH 25mW FPV transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Specification: Frequency:5. 8ghz 6 bands 48 channels, with raceband: 5658-5917MHz Output power:25mW Input voltage: 3. 3v-5. 5v current consumption: 280matyp camera resolution: 600tvl field of view: 120° Video Format:NTSC Antenna: Dipole Brass Antenna Size: 15X 12.

5mmlx w weight: 3. 4g package included: 1 x wt05 aio fpv camera with cable 1 X User Manual 1 X Cable Power by 1S lipo battery. Easy installation for racing drone, Only 3. 4g. Button control instead of switches to change channels. Description : the aio camera combo is perfect for ultra micro drone. It is a combination of a FPV camera,  a transmitter and an antenna.

It includes everything into a single unit no bigger than one dollar coin. It's compatible with branded FPV googles and monitors equipped with 5. 8ghz receivers. Installation is easy and can be done in seconds. No soldering or special skills are required. All you need is to put it into your drone and power it by a 1S Lipo battery.




Similar products

BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
BETAFPV 75mm Tiny Whoop Frame Kits with 3-blades Props
Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera
NIDICI 20pcs(10 Pairs) 1935 Propeller 1.9 Inch 3-blade Props for iX2 Tiny Q90 90GT FPV Brushless Micro Drone
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
BETAFPV 3 Sets of 6x15mm Motor (Speed: Insane) 19500KV TW for Blade Inductrix Tiny Whoop
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Frsky XM Plus Mini Receiver


Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Easy installation for racing drone, Only 3. 4g. All in one vtx + camera + antenna, plug and play, ready to fly. Miniature and light weight design. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14.

8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Specificationoutput power: 25mWSupply Voltage: 2.

9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna: exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature::25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type:FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ.


Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Blade Main Frame: Inductrix
Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV


AKK A1 Mini 5.8Ghz 40CH 25mW FPV Transmitter Raceband 600TVL FPV Micro AIO Camera with Clover Antenna for FPV Camera System

This aio camera can be installed in minutes and ready to fly. Easy installation for racing drone, Only 3. 4g. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft. Integrated booster circuit prevents motor and servo interference.

Miniature and light weight design. All in one vtx + camera + antenna, plug and play, ready to fly. Super light weight:4. 5g, small size: 18.


Similar products

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera
Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 48CH 25mW FPV transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone
Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad
BTG Propellers Props for DIY Micro Indoor FPV RC Racing Quadcopter Racer Drone Miniquad Frame Support 8520 Motor Like Tiny QX90 QX95 LT105 JJPRO T1 T2 Kingkong Q100
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame


Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

Installs in seconds. Super light weight:4. 5g, small size: 18. 7*13mml*W. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Button control instead of switches to change channels. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix.

Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle.

5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. 4-leaf antenna for better signal transmission, easy to install. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft. Speed: insane, 19000kv / 70000 rpm. All in one vtx + camera + antenna, plug and play, ready to fly.




Similar products

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Blade Main Frame: Inductrix
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV
Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings


Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

Easy installation for racing drone, Only 3. 4g. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Work for blade inductrix, Tiny Whoop, Nano QX etc. Button control instead of switches to change channels. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft.

Speed: insane, 19000kv / 70000 rpm. Bonus rubber rings. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle.


Similar products

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Blade Main Frame: Inductrix
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector
Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery
5pcs-Tattu LiPo Battery Pack 220mAh 3.7V 45C 1S with Ultra Micro for Blade Inductrix Tiny Whoop FPV Nano QX Nano CPX Nano CPS in the E-flite Micro Planes


Wolfwhoop WT02 600TVL Ultra Micro AIO Camera and 200mW 5.8GHz 40CH Video Transmitter with Clover Antenna for FPV Indoor Racing

Feature: nickel-plated 3 leaf antenna micro size and light weight Power off memory: Replay the very last frequency band and channel Integrated camera and 25mW transmitter Specification: Frequency: 5. 8ghz 5 bands 40 channels, with raceband: 5658-5917MHz Output power: 200mW Input power: 3. 2-5v video system: NTSC Current consumption: 3.

2v-5v, 500matyp--200mw camera resolution: 600tvl mini illumination: 1 lux antenna dimensions: 22mm×29mm diameter Antenna: 3 lobe right hand circular polarized Field of view: 120°viewing angle Size: 19. 5×14mml×w weight:4. 7g package included: 1 x wt02 aio fpv camera with cable 1 X cable 1 X user manual Power by 1S lipo battery.

Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. 4-leaf antenna for better signal transmission, easy to install. With 1. 25mm jst plug, perfect for Inductrix FC. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft.




Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 48CH 25mW FPV transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
GOQOTOMO GT02 200mW 5.8GHz 40CH FPV Video Transmitter with Ultra Micro AIO NTSC 600TVL Camera Combo for FPV Indoor Racing
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX


Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft. Speed: insane, 19000kv / 70000 rpm. With 1. 25mm jst plug, perfect for Inductrix FC.

. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Easy to install, easy to change channel with button. Weight: 1.


Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 3 Sets Tiny Whoop JST-PH 2.0 Pin Male Female Connector Cable Kit for Blade Inductrix Battery Upgrade
Crazepony 6 in 1 JST-PH 2.0 Lipo Charging Adapter Cable to 6S Balance Charger
Crazepony 1S Lipo Battery Charger with Micro JST 1.25 and JST-PH 2.0 for Blade Inductrix Tiny Whoop mCX mCPX
Blade Main Frame: Inductrix
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV


Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV

Five bands 40 channels with raceband: 5658-5917MHz, show on LED digital display. Bonus rubber rings. Tiny whoop Blade inductrix future choice of battery. All in one vtx + camera + antenna, plug and play, ready to fly. 40 channel with raceband, good quality image with zero latency, Button control instead of switches to change channels.

Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Idtx483-cf. Installs in seconds.


Similar products

Blade Main Frame: Inductrix
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony Blade Inductrix Case Quad Box with Foam Liner Twin Zips for Inductrix FPV Micro Quadcopter
Blade Prop Set (4) White: Inductrix
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector


Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug

Idtx483-cf. Package list: 1x 3-blades antenna for TX 1x 4-blades antenna for RX Power by 1S lipo battery. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Rakon. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX.

Easy installation for racing drone, Only 3. 4g. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Miniature and light weight design. Circularly polarized for reduced interference. Clover-leaf style antenna / Omni-directional. Enough signal range for small park flyers and quad racers. Installs in seconds. 4-leaf antenna for better signal transmission, easy to install.

Work for blade inductrix, Tiny Whoop, Nano QX etc. Plug and play, ready to fly, perfect for DIY. Capacity: standard voltage 4. 2v, 230mahor High voltage 4.


Similar products

Crazepony 700TVL Wide Angle FPV Camera 700TVL 3.6mm Lens NTSC for QAV250
AKK 5.8G FPV 2000M Range TS832+RC832 Audio Video Transmitter and Receiver for FPV Drone
EACHINE EV800 5 Inches 800x480 FPV Goggles Video Glasses 5.8G 40CH Raceband Auto-Searching Build In Battery
Wolfwhoop WT832 WR832 5.8GHz 40CH 600mW Wireless FPV Transmitter and Receiver for Drones
AKK K31 FPV 40Ch 600mW 5V Out for Cam Mini AV Transmitter with Race Band
EACHINE VR-007 5.8G 40CH FPV Goggles Video Glasses 4.3 Inch With 7.4V 1600mAh Battery
AKK TS5823L 5.8G 200MW 40Ch Mini AV Transmitter for FPV Drone
RioRand RC Hobby C23212 LiPo Voltage Checker + Warning Buzzer
AKK KC02 600mW FPV Transmitter with 600TVL 2.8MM 120 Degree High Picture Quality Sony CCD Camera for FPV Multicopter
Corprit Mini Hidden Spy Camera HD 1000TVL CCTV FPV Camera for Quadcopter QAV210/180/250


Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector

All in one vtx + camera + antenna, plug and play, ready to fly. 40 channel with raceband, good quality image with zero latency, Button control instead of switches to change channels. All in one vtx + camera + antenna, plug and play, ready to fly. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix Micro JST 1.

25 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 54mm * 12. 5mm * 6. 0mmweight: 6. 3g/per unitcapacity: 230mah in standardvoltage, 250mAh in high voltageThe connector plug: Micro jst 1. 25 aka molex1. 25, pico, mcxthis battery is lighter than the usual 230mah battery, and can be charged to either standard voltage 4.

2v, 230mah or high voltage 4. 35v, 250ish mah. This is newly developed chemistry for a longer lifetime and safer charging situation. Installs in seconds. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Easy to install, easy to change channel with button.


Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV
Crazepony Battery Box Plastic Storage Case with Foam Liner for 1S Lipo Battery
BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad