AudioDia

Transmitter has two switching buttons for easy changing CH and FR. Transmitting power: 600mW, designed for all kinds of drones. Features: this 40 Channel 5. 8ghz 600mw fpv transmitter has high power, designed for all kinds of drones. Two switching buttons: easy to change frequency channels and bands. Bundled with antenna: Transmitting distance >3000m open area.

Frequency: 5. 8ghz 5 bands 40 channels, with Raceband: 5658-5917MHz. Power off memory: replay the very last frequency band and channel Specification: 40 channels: Cover A, E, b, F, r bands Video Input Level: 0.8, 1. 0, 1. 2 vp-p video input impedance: 75 ohm video Format: NTSC/PAL Video Band Width: 0-8. 0 mhz frequency: 5.

8ghz 5 bands 40 channels, with raceband: 5658-5917mhz transmitting distance > 3000m open area supply current: 280 mA Output Voltage: 5V Operating Temperature -10 +85 C Output Impedance: 50 Ohm Transmitter connector:RP-SMA femaleAntenna connector: RP-SMA male Audio carrier Frequency: 6. 5 mhz audio input Level: 0

5, 2. 0 vp-p audio input impedance: 10K Ohm Weight: 8g Package: 5. 8g fpv transmitterX1 5.

---

Crazepony 2pcs 90mm FPV Antenna Extension Cable RP-SMA Male to RP-SMA Female Antenna Adapter

3. 5'' 90mm fpv antenna extension cable rp-sma male to rp-sma female antenna adapterthe extension cord has two models, turn out or the original interface, antenna originally used for the internal threads within the needle hub purchase within needle antenna extension cable, such as the antenna that you used previously for the internally threaded Inner hole interfaces purchase female antenna extension cable, turned out to be What the interface antenna, but the antenna to extend it!Specification:RG-178 military standard Teflon silver plated wire feeder with acid corrosion resistant high temperature and other characteristicsHigh-frequency low-loss antenna extension cord.

Connectors: rp-sma female to rp-sma male cablefrequency range: 0-6GImpedance: 50ΩCable: RG178Wire diameter: 1. 8mmlength: 100mm ± 3mm, line length 90mm--------------------package including2 * fpv antenna Extension Cable RP-SMA Male to RP-SMA Female Antenna Adapter Connectors: rp-sma female to RP-SMA Male cable.

Type: high quality rg178 cable 3. 5''90mm. Capatibility: Suitable for various angle. Characteristics: High temperature and acid corrosion resistent, high-frequency low-loss antenna extension cord.


Similar products

---

Matek Systems PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad

Mounting hole suit for cC3D naze32 SP Racing F3 FC. Characteristics: High temperature and acid corrosion resistent, high-frequency low-loss antenna extension cord. Type: high quality rg178 cable 3. 5''90mm. The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB.

It distributes power from a lipo pack to 6 escs, video transmitters, RC receiver, LEDs, Servos, Flight Controllers, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, etc. Total 6 pairs esc solder tabs are fit for H or X type frame. It also provides linear regulated dc 12v for powering Cameras, Servos, Video Transmitters, RC receiver, Flight Controllers, LEDs, etc.

A great package to get your Racing Drones powered up and racing. It comes with an XT60 for easy connection to LiPoly batteries. Features: • 2oz copper, 4-layers and 1. 6mm pcb • built-in xt60 socket • total 6 pairs esc solder tabs are fit for h or x type frame • 5v and 12v output led indicators • regulated 5v and 12v outputs • Short circuit tolerant Specs: Input voltage range: 9 - 18V DC 3S-4S LiPoly operation Output continuous current: 25Ax4 or 15Ax6 Output Peak current 10 seconds/minute: 30Ax4 or 20Ax6 BEC 5V output: 5V/2A Max.

2. 5a 10s/minute output ripple: 40mv vin= 16v, vout= 5v@2a load short-circuit tolerant: 5 seconds/minute BEC 12V output 4S LiPoly, 13~18V DC: 12V/500mA Max. 0


Similar products

---

Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug

Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. Mounting hole suit for cC3D naze32 SP Racing F3 FC.

5v & 12v output led indicators & Short circuit tolerant. Plug type: rp-sma Plug for both receiver and transmitter. Circularly polarized for reduced interference. Greatly increases video and audio signal. Characteristics: High temperature and acid corrosion resistent, high-frequency low-loss antenna extension cord.

Precision manufactured and 100% tested. Capatibility: Suitable for various angle. Runs on 5. 8 ghz commonly used for FPV. Clover-leaf style antenna / Omni-directional. Type: high quality rg178 cable 3. 5''90mm. The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB.




Similar products

---

HOBBYMATE 180Pcs Assorted M3 Nylon Screws Nut Standoffs Spacers for DIY Building of FPV RC Quadcopter Drone, PC mods

Characteristics: High temperature and acid corrosion resistent, high-frequency low-loss antenna extension cord. Mounting hole suit for cC3D naze32 SP Racing F3 FC. Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package.

Precision manufactured and 100% Tested. 180pcs nylon hex spacers/ Screws/ Nuts Assorted Kit. Multifunction: the assortment come with Nylon Hex Spacers, Stand-off, Nut, Screw, applies to many area. There are 3 millimeter bouth size come with beautiful single plastic box. Premium quality: all products are made of durable nylon, Strong, anticorrosive, compact and portable.

What you get: 180pcs black m3 nylon hex Spacers Screw Nut Assortment, and our 18-month warranty and friendly customer service. Come with the plastic box: spacers male-female 6mm + 6mm, m3 10pcs spacers male-female 15mm + 6mm, m3 10pcs spacers male-female 20mm + 6mm, m3 10pcs spacers male-female 8mm + 6mm, m3 10pcs Spacers Male-Female 12mm + 6mm, M3 10pcs Spacers Male-Female 10mm + 6mm, M3 10pcs Screws M3 x 6mm 60pcs Nuts M3 60pcs Package include: 1 Nylon Hex Screw Nut Assortment Kit in box Connectors: rp-sma female to RP-SMA Male cable.

Type: high quality rg178 cable 3. 5''90mm.


Similar products

---

AKK K31 FPV 40Ch 600mW 5V Out for Cam Mini AV Transmitter with Race Band

Characteristics: High temperature and acid corrosion resistent, high-frequency low-loss antenna extension cord. 40 channels: cover a, F, E, b, r bands. Small size and light weight. 40 channels, e, cover A, F, b, r bands. Easy to use 2 buttons and 2 LED display to change channels and frequencies conveniently.

Power off memory: replay the very last frequency band and channel. Mounting hole suit for cC3D naze32 SP Racing F3 FC. Type: high quality rg178 cable 3. 5''90mm. The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a lipo pack to 6 escs, video transmitters, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, Flight Controllers, RC receiver, LEDs, etc.

Total 6 pairs esc solder tabs are fit for H or X type frame. Please make sure your camera is less than 300mathe line of the manual should be "V OUT" "GND" 'VIDEO IN" "GND" "7-24V" Connectors: rp-sma female to RP-SMA Male cable. Features:This 5. 8ghz 40ch fpv transmitter has double push buttons for easy changing CH and FR.

Capatibility: Suitable for various angle.


Similar products

---

Vicdozia 2.5mm Replacement 170 Degree Wide Angle Camera DV Lens for Gopro HD Hero, Hero 2 3, SJCAM SJ4000 SJ5000, HS1177 Runcam Swift FPV Cameras

If you have any quality issue or any requests, please do not hesitate to contact us. Package include: wide angle Lens x1; Lens Cover x1; Base Holder x1. Package include: 1 x wide angle lens Replacement 1 x Lens Cover 1 x Base Holder Warranty: 1. The product was fulfilled by Amazon, you will receive it faster.

Vicdozia 2. 5mm replacement wide angle camera lens 170° m12 lens for gopro hero, hero 3, hs1189, hs1177, SJ5000, SJ4000, Hero 2, Runcam Swift FPV RC Racing Quadcopter Drones Cameras. Sensor size: 1/2. 5" thread size: 12mm*05 material: hard glass + tough metalstructure: 6gcompatible with: gopro hero, sjcaM SJ4000 SJ5000 series, Hero 2, Hero 3, HS1177 Runcam Swift Flight FPV Quadcopter Racing Drones etc.

It supports full range of 40 channels including raceband. It allows more of the scene to be included in the photograph and performs well during the day. Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package.




Similar products

---

Crazepony 4pcs Littlebee 20A Mini ESC Oneshot125 Electronic Speed Controller 2-4S Brushless for FPV Multicopter Quadcopter

Easy upgradeswith the blheli software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.

Input: 2-4s lipoconstant: 20 ampsburst: 30 AmpsWeight: 4g bare boardDimensions: 23x12. 5x3mmmotor wire: 70mm signal wire: 120mm pcb - 4 layer blind pole pcb - 3oz pourmosfet: n-channeloneshot and blheli 14 pre InstalledPackage Including4 * Littlebee 20A Mini ESC Oneshot125 Electronic Speed Controller 2-4S Brushless for FPV Multicopter Connectors: rp-sma female to RP-SMA Male cable.

Capatibility: Suitable for various angle. Type: high quality rg178 cable 3. 5''90mm. The pdb-xt60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a lipo pack to 6 escs, flight controllers, Video Transmitters, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, RC receiver, Servos, LEDs, etc.

Total 6 pairs esc solder tabs are fit for H or X type frame. It allows more of the scene to be included in the photograph and performs well during the day. Anbee® circularly Polarized for Reduced Interference.


Similar products

---

Crazepony RunCam Swift 600TVL FPV Camera 2.8mm Lens OSD DC 5-17V

Support 2s, 3s, 4s battery dc 5 to 17V Wide voltage Power input. If you have any quality issue or any requests, please do not hesitate to contact us. Package include: wide angle Lens x1; Lens Cover x1; Base Holder x1. Littlebee 20a esc is a super compact, lightweight, high performance speed controller for your racing multi-rotor.

Pre-flashed with blheli and ready to use with Oneshot aka oneshot125PWMsyncmode via compatible flight controllers running Cleanflight or similar. These escs do not have a bec, you will need to supply 5v power to your flight controller with a UBEC or stepdown voltage regulator. Littlebee 20a esc is using silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional braking capabilities.

More rc racing quad-copter product is provided by Crazepony on Amazon. Bring your eyes into the sky and racing like a free bird, enjoy the ultimate first person view experience. Only weight 12g with case. Runcam swift 600tvl FPV Camera 2. 8mm lens osd dc 5-17v with ir blocked for multicopterThis camera keeps 600TVL resolution and excellent color rendition, supporting 5 to 17V operating voltage.

Lumination:001lux/1.


Similar products

---

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Support 2s, 3s, 4s battery dc 5 to 17V Wide voltage Power input. 5v & 12v output led indicators & Short circuit tolerant. It allows more of the scene to be included in the photograph and performs well during the day. Characteristics: High temperature and acid corrosion resistent, high-frequency low-loss antenna extension cord.

Not for gopro Hero 5!2. 5mm replaceable ultra-Wide Angle/M12 Thread Interface Camera Lens. Size: 1/2. 5"; viewing angle: 170 °; focal length: F2. 65 mm; aperture Range: 2. 8. This lens is with high quality hard glass and tough metal. It is suitable for fixed-wing aircraft and Multirotor like QAV250, which are highly required in voltage and weight.

Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14.


Similar products

---

Wolfwhoop WT5828 5.8G 600MW 32CH FPV Video Transmitter for Quadcopter

Capatibility: Suitable for various angle. Mounting hole suit for cC3D naze32 SP Racing F3 FC. Supply current : 280ma specifications: output Impedance: 50 Ohm Output Power: 27-28dBm Operating Voltage: 7. 0-24v operating temperature: -10-+85 C Video Band Width: 0-8. 0 mhz video format: ntsc/paL Video Input Level: 0

8-1. 2 vp-p video input impedance: 75 Ohm Audio Carrier Frequency: 6. 5 mhz audio input Level: 05-2. 0 vp-p audio input impedance: 10k ohm antenna connector: rpsma connector package included: 1 x WT5828 Transmitter 1 x Antenna 1 x Product manual 3 x Connect Cables Connectors: rp-sma female to RP-SMA Male cable.

32channels: cover A, B, E, F bands. Output power: 27-28dbm, Supply Current : 280mA. There is a sufficient amount of power 600mW with stable performance, less heat, long distance transmission. If you have any quality issue or any requests, please do not hesitate to contact us. Package include: wide angle Lens x1; Lens Cover x1; Base Holder x1.

Littlebee 20a esc is a super compact, lightweight, high performance speed controller for your racing multi-rotor. Pre-flashed with blheli and ready to use with Oneshot aka oneshot125PWMsyncmode via compatible flight controllers running Cleanflight or similar. These escs do not have a bec, you will need to supply 5v power to your flight controller with a UBEC or stepdown voltage regulator.




Similar products