AudioDia

Balun one nine includes an antennaGuard varistor on the input, protecting your SDR setup from spurious ESD. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input. Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use. Excellent specifications & low insertion loss.

Only 39. 2mm x 13. 0mm and 5g! Designed for hf applications, but specifications are accurate to frequencies up to 90MHz+. Very low insertion loss of -1. 3db typical, with a maximum input power of +28dBm. An excellent way to attach a long wire antenna to the Ham It Up, this 1:9 balun has an SMA output port and high-quality spring-type terminal block input for your coax.

Meet 'balun one Nine', a small, cost-effective balun. The esd protection is excellent--it passes IEC61000-4-2, an 8kV contact discharge test, with a response time of just 300ps. At 39. 2mm x 13. 0mm in total size including connectors! this balun was designed to be light in weight and light on your wallet.

---

NooElec Ham It Up v1.3 - NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks

We have even populated most of the components for you. A new enclosure, or enclosure upgrade kit, is required. Full 1-year warranty. Proudly made in the USA and Canada with high-quality components! Ham/amateur radio enthusiasts, rejoice! our MF/HF converter for software defined radio will allow you to listen to MF and HF through your existing software defined radio SDR.

We have the sma connector required to complete this bonus noise source circuit available for a small additional fee. Proudly designed, fabricated and assembled in the USA and Canada! Brand new & improved v1. 3 version of our popular upconverter is now available for immediate shipment! Improvements include increased sensitivity, fully-assembled broadband RF noise-source circuit, side-mounted LED indicators, optional battery-powered operation, ultra-low voltage noise floor, u.

Fl socket for optional external clock injection, enable/disable passthrough toggle switch, including female sma input and output jacks, PTC protection fuse on power input, ultra-high-Q & low ESR components used for all filters, ESD protection on the input to product your Ham It Up and SDR, much more! These improvements are in addition to the standard features of the Ham It Up line, surface-mount high-accuracy oscillator and much, and open-hardware design with full published circuitry and specifications.

Both items can be found in our store. If you do not currently have an SDR we have plenty of low-cost solutions available in our store. Free bonus: we had space left on the PCB, so rather than waste it we have added a noise source circuit at no additional cost. Antenna protection on the RF input, in-circuit in both enable and passthrough mode.




Similar products

---

Extruded Aluminum Enclosure Kit, Blue, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

Listen to all hf, down to 100kHz and below, with nearly any software defined radio! Enclosures for v1. 2 and earlier are still available in our webstore for a limited time. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately.

Note:only compatible with Ham It Up v1. 3 and higher. High-quality custom aluminum enclosure for Ham It Up v1. 3. A better option than unshielded cases, most certainly, and fairly priced as well. The enclosures include the appropriate standoffs and screws to mount the upconverter. Antenna protection on the RF input, in-circuit in both enable and passthrough mode.

Two color options are available - metallic blue with laser-etched labeling, and silver with color silkscreen labeling. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Full 1-year warranty. Proudly made in the USA and Canada with high-quality components!

Open-hardware design! Full documentation available: http://opendous.


Similar products

---

DHT Electronics RF coaxial coax cable assembly SMA male to MCX male right angle 6''

Full 1-year warranty. Rf coaxial coax cable assembly sma male to mcX male right angle 6 inches Listen to all hf, down to 100kHz and below, with nearly any software defined radio! Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined.

Ham it up upconverter sold separately. Package include:1 x SMA to MCX cable. Cable type: coaxial Quality Low Loss RG316. Open-hardware design! Full documentation available: http://opendous. Org/Upconverter. Connector material:Pure brass with Great connectivity. Not Alloy. Metal case helps to protect PCB from stray EMI, improving sensitivity.

Includes all required hardware to mount your PCB! Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings.


Similar products

---

DHT Electronics RF coaxial coax assembly SMA male to SMA male 20 inches

Cable type: coaxial Quality Low Loss RG316. Impedance :50 ohm. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Open-hardware design! Full documentation available: http://opendous. Org/Upconverter. Listen to all hf, down to 100kHz and below, with nearly any software defined radio!

Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. Package include:1 x SMA to MCX cable. Proudly made in the USA and Canada with high-quality components! Metal case helps to protect PCB from stray EMI, improving sensitivity.

Includes all required hardware to mount your PCB! High-quality custom aluminum enclosure for Ham It Up v1. 3. Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings.

Cable length:20 inches.


Similar products

---

Broadcast FM Block Filter 88 - 108 MHz Block by RTL-SDR Blog

Impedance :50 ohm. Full 1-year warranty. Uses smA female connectors. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. Package include:1 x SMA to MCX cable. Dht electronics brand is a registered trademark of DHT LLC.

Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation. Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1. 5 db between 1 - 3 GHz. Uses sma female connectors. Proudly made in the USA and Canada with high-quality components!

. Also known as "FM Trap". Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Connector material:Pure brass with Great connectivity. Not Alloy. Comes with a free SMA male to SMA male adapter.


Similar products

---

DHT Electronics RF coaxial coax assembly SMA male to SMA male 3ft

Comes with a free SMA male to SMA male adapter. Designed for sdr users. Cable length:3 feet. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Package content : 1 x SMA Cable. Dht electronics brand is a registered trademark of DHT LLC.

Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Proudly made in the USA and Canada with high-quality components! Full 1-year warranty. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Dht electronics brand is a registered trademark of DHT LLC.

Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation. Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1. 5 db between 1 - 3 GHz. Uses sma female connectors. Open-hardware design! Full documentation available: http://opendous.




Similar products

---

uxcell 5 Pcs Gold Tone SMA Male to Male Plug RF Coaxial Adapter Connector

Null listen to all hf, down to 100kHz and below, with nearly any software defined radio! Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Product name : sma male to sma male RF Connector;Type : Male to Male. Open-hardware design! Full documentation available: http://opendous.

Org/Upconverter. Color : Gold Tone. Package content : 5 x sma Male to SMA Male RF Connector. Cable length:20 inches. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. Package include:1 x SMA to MCX cable. Comes with a free SMA male to SMA male adapter.

Designed for sdr users. High-quality custom aluminum enclosure for Ham It Up v1. 3. Proudly made in the USA and Canada with high-quality components! Weight : 26g.


Similar products

---

Premium RTL-SDR w/ Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio. - NooElec NESDR SMArt

Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation. Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1. 5 db between 1 - 3 GHz.

Uses sma female connectors. Full 1-year warranty. Comes with a free SMA male to SMA male adapter. Designed for sdr users. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings.

Product name : sma male to sma male RF Connector;Type : Male to Male. Premium rtl-sdr bundle includes newly designed nesdr smArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m 6. 5' rg-58 feed cable, and 3 antenna masts. You spoke, we listened! this premium rtl-sdr was designed, developed and fabricated by NooElec in the USA and Canada in order to implement a wide array of feature requests.

Weight : 26g.


Similar products

---

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas

Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. For custom antennas note that this dongle has an SMA F connector not RP-SMA. This is an rtl-sdr software defined radio receiver with rtl2832u ADC chip, 1PPM TCXO, R820T2 tuner, SMA F connector and aluminium case with passive cooling.

Tunes from 500 kHz to 1. 7 ghz with up to 3. 2 mhz of instantaneous bandwidth. Perfect for use as a computer based radio scanner with free software like SDR#, HDSDR, SDR-Radio, Linrad, GQRX or SDR Touch on Android. Hf works in direct sampling mode - V. 3 models and above only. Open-hardware design! Full documentation available: http://opendous.

Org/Upconverter. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Installation on windows is simple, please Google for the free RTL-SDR Quickstart Guide for installation instructions. 2.


Similar products

---

RTL-SDR Blog SMA Male to SMA M, BNC F, Type N F, Type F F, UHF F, PAL F Straight Adapters Bundle

Listen to all hf, down to 100kHz and below, with nearly any software defined radio! Hf reception below 24 MHz runs in direct sampling mode. Including bnc f, type f f, type n f, UHF F and PAL F. Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Material : alloy;total size approx.

Comes with a free SMA male to SMA male adapter. Designed for sdr users. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. Be prepared to connect to almost any antenna or device. Included is a bonus sma m adapter for many common devices like upconverters which have SMA F connectors.

50 ohm straight adapters - no cabling. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation. Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1.

5 db between 1 - 3 GHz.


Similar products