TEMCo 3/8″ Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Lifetime warranty. Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

Diameter: 3/8". The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Color: black, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

More information about TEMCo #ad

TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

Lifetime warranty. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, non-drying, forming a permanent, the adhesive solidifies, flexible and water resistant barrier.

TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Color: red, material: Polyethylene, Shrink Ratio: 3:1. Diameter: 3/8". Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Adhesive reflow will occur at temperatures above 80 deg C 176 deg F.

More information about TEMCo #ad


Similar products



TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more. Lifetime warranty. Lifetime warranty. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more.

Diameter: 1/4". Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: black, material: Polyethylene, Shrink Ratio: 3:1.

. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Diameter: 3/8".

More information about TEMCo #ad


Similar products



TEMCo 1/2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 1/4".

TEMCo 1/2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

More information about TEMCo #ad


Similar products



TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1/2". Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Lifetime warranty. Lifetime warranty. Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more.

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Diameter: 1/4". Color: red, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

More information about TEMCo #ad


Similar products



TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more.

Diameter: 1/4". Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1". Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more.

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Diameter: 1/2". When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Lifetime warranty. Lifetime warranty. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

More information about TEMCo #ad


Similar products



TEMCo 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: black, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

TEMCo 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

More information about TEMCo #ad


Similar products



TEMCo 9/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Color: black, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Diameter: 3/8". Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 3/16". Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier.

TEMCo 9/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Lifetime warranty. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Lifetime warranty. Lifetime warranty. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more.

Diameter: 1/4".

More information about TEMCo #ad


Similar products



TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Diameter: 3/8". Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 1". Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 1". The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Lifetime warranty. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more. Diameter: 1/4".

More information about TEMCo #ad


Similar products



TEMCo 1/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Lifetime warranty. Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Color: red, material: Polyethylene, Shrink Ratio: 3:1. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

TEMCo 1/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Lifetime warranty. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

More information about TEMCo #ad


Similar products



Uxcell Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing, 4' Length, 12.7 mm, 1/2"

#ad
Uxcell a15061700ux0087 #ad - Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Diameter: 1". Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1/2". Lifetime warranty. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more.

Diameter: 1/4". Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 9/16". Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more. Diameter: 1/4". Color: red, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty. Net weight: 34g; package content: 1 x Heat Shrink Tubing; Main Color: Black.

Uxcell Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing, 4' Length, 12.7 mm, 1/2" #ad - Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

More information about Uxcell a15061700ux0087 #ad


Similar products