TEMCo 1.5″ Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Upon cooling, forming a permanent, the adhesive solidifies, non-drying, flexible and water resistant barrier.

. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

TEMCo 1.5" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Diameter: 1. 5". Lifetime warranty. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

More information about TEMCo #ad

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Diameter: 1". Lifetime warranty. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.

Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

More information about TEMCo #ad


Similar products



TEMCo 2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Upon cooling, non-drying, forming a permanent, the adhesive solidifies, flexible and water resistant barrier. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.

. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Color: black, material: Polyethylene, Shrink Ratio: 3:1.

TEMCo 2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Diameter: 1". Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 2". The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction.

Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

More information about TEMCo #ad


Similar products



TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. Color: red, material: Polyethylene, Shrink Ratio: 3:1.

Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 2". Lifetime warranty. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction.

TEMCo 1" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Lifetime warranty. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

More information about TEMCo #ad


Similar products



GLE2016 Black Duall Wall Heat Shrink Roll Tube Adhesive-Lined 3: 1 Shrinking Ratio Cable Wire Sleeving Wrap Dia 30mm 1-1/4

#ad
GLE2016 #ad - Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Lifetime warranty. Appliance: used for appliance/auto electric wire cable harness wrapping Diameter: 1". Color: black, material: Polyethylene, Shrink Ratio: 3:1.

Feature: dual-wall, waterproof, insulation, adhesive lined, low Temperature shrinkage, soft, stable performance, shrinking fast, etc. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Item name: dual Wall Heat shrink Tubing;. Material: polyolefin color: black shrink ratio: 3:1; round diameter: 30mm/1-1/4 inch rated voltage: 600V Beginning shrinking temperature: 80C, Completely shrinking temperature: 120C Heating tool: hot air gun; Compliant: the standard of RoHS, UL and CSA certified.

GLE2016 Black Duall Wall Heat Shrink Roll Tube Adhesive-Lined 3: 1 Shrinking Ratio Cable Wire Sleeving Wrap Dia 30mm 1-1/4 #ad - Color: red, material: Polyethylene, Shrink Ratio: 3:1. Package content 1 heat shrink tubing 1. 22m length;. Lifetime warranty. Shrink ratio: 3:1; total Length: 1. 22m/4ft;. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

More information about GLE2016 #ad


Similar products



TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Round diameter: 30mm/1-1/4 Inch;. Lifetime warranty. Lifetime warranty. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.

Material: polyolefin; Color: black. Color: black, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Diameter: 1". Package content 1 heat shrink tubing 1. 22m length;. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 2". Color: black, material: Polyethylene, Shrink Ratio: 3:1. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.

More information about TEMCo #ad


Similar products



TEMCo 1/2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Item name: dual Wall Heat shrink Tubing;. Shrink ratio: 3:1; total Length: 1. 22m/4ft;. Material: polyolefin; Color: black. Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more.

Diameter: 1". Color: black, material: Polyethylene, Shrink Ratio: 3:1. Lifetime warranty. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F.

TEMCo 1/2" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Lifetime warranty. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 1/2". Color: black, material: Polyethylene, Shrink Ratio: 3:1. Color: red, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

More information about TEMCo #ad


Similar products



TEMCo 1 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK

#ad
TEMCo #ad - Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Shrink ratio: 3:1; total Length: 1. 22m/4ft;. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.

Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Diameter: 1/4".

TEMCo 1 3/16" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft BLACK #ad - Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Diameter: 1 3/16". Diameter: 1". Lifetime warranty. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

Round diameter: 30mm/1-1/4 Inch;. Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more.

More information about TEMCo #ad


Similar products



TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Diameter: 1/4". Lifetime warranty.

Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Item name: dual Wall Heat shrink Tubing;. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more.

TEMCo 3/8" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more. Diameter: 1". Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.

Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more. Diameter: 3/8". Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

More information about TEMCo #ad


Similar products



Black and Red - 3:1 Shrink Ratio - 130 PC. Dual Wall Adhesive Marine Heat Shrink Kit

#ad
HuBB Hardware SES002 #ad - Diameter: 1/4". Lifetime warranty. 130 piece dual-wall adhesive heat Shrink Kit includes 6 different size diameter tubes each measuring 3 1/2" long. Buy with confidence as your satisfaction is 100% guaranteed. Lifetime warranty. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Material: polyolefin; Color: black.

Black and Red - 3:1 Shrink Ratio - 130 PC. Dual Wall Adhesive Marine Heat Shrink Kit #ad - Color: black, material: Polyethylene, Shrink Ratio: 3:1. Electrical applications. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Package content 1 heat shrink tubing 1. 22m length;. Shrink ratio: 3:1; total Length: 1. 22m/4ft;.

More information about HuBB Hardware SES002 #ad


Similar products



TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED

#ad
TEMCo #ad - Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Great variety of top pro-quality heat shrink tubing. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Diesel Fuel, Gasoline, Oil, and more. Diameter: 3/8". Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

TEMCo 1/4" Glue Lined Marine Heat Shrink Tube 3:1 Adhesive 4 ft RED #ad - Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more.

Diameter: 2". Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1".

More information about TEMCo #ad


Similar products