AudioDia

Made of premium chrome vanadium steel with a protective black oxide finish. To protect against rust and corrosion, the black oxide finish absorbs and holds oil, repelling moisture. Set includes:3 3/8 in. Adds length to access hard-to-reach fasteners. Drive extensions: 3, 6, 8 in. The through-hole in the drive end locks onto the tang of impact wrenches or drivers.

Drive impact Extension Set. Engineered for use with impact drivers. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Work faster and avoid unnecessary disassembly steps with the TEKTON 3-pc. Through-hole in drive ends locks onto drive tang. Engineered for use with impact drivers, they reach past obstructions or into tight, narrow spaces and deliver the torque needed to break loose stubborn fasteners.

3/8 in. A spring-loaded detent ball securely latches onto sockets, preventing them from being dropped or left sticking on fasteners.

---

19 mm, 13-Sockets | 47925 - TEKTON 3/8-Inch Drive Deep Impact Socket Set, Metric, Cr-V, 6-Point, 7 mm

Made from high-strength chrome vanadium steel, our impact sockets are more resistant to drive end round out than standard impact sockets, resulting in a longer useable life. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Drive deepwell 6-point sockets metric: 7, not just the corners, 16, 6-point socket design grips the flat sides of fasteners, 17, 10, 9, 15, 18, 19 mm1 storage case High-torque, 11, 8, 12, 13, 14, preventing round-off.

Extra-deep broach accommodates longer fasteners. Tekton impact sockets efficiently transfer torque from impact wrench to fastener, loosening the most stubborn nuts and bolts. Built for use with impact tools, these TEKTON 3/8 in. An extra-deep broach enables you to access the entire length of fasteners. Drive deep impact sockets effortlessly break free rusty suspension and exhaust bolts, quickly remove stuck lug nuts, and loosen crank bolts with ease.

Meets or exceeds ANSI performance standards. The customized red tektoN case can be stored in a tool chest or carried to your job site. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. The high-torque, 6-point socket grips the broad, not just the corners, flat sides of nuts and bolts, so there's no need to worry about stripping fastener head or damaging socket.

Molded size markings keeps set organized and identifies any missing sockets.


Similar products

---

TEKTON 4964 Impact Universal Joint Set,3-Piece

High-contrast permanent laser etched size markings are easy-to-read, even in low light. Impact Universal Joint Set. Made from premium chrome vanadium steel, they are precisely heat treated for superior strength and protected by a corrosion-resistant black oxide finish. Set includes:3 universal joints: 1/4, 3/8, 1/2 in.

Engineered for use with impact drivers. Works around obstructions to access hard-to-reach fasteners. Giving you just the right angle when space is limited, they save you time and help you avoid unnecessary disassembly steps. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped.

Made of premium chrome vanadium steel with a protective black oxide finish. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Through-hole in drive ends locks onto drive tang. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off.

Extra-deep broach accommodates longer fasteners. Increase your access with the TEKTON 3-pc. Meets or exceeds ANSI performance standards. Engineered for use with impact drivers, these problem solvers work around obstructions and get into tight spots, delivering the torque needed to break loose stubborn fasteners.




Similar products

---

19 mm, 13-Sockets | 47915 - TEKTON 3/8-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 6-Point, 7 mm

Engineered for use with impact drivers. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. Made of premium chrome vanadium steel with a protective black oxide finish. The shallow socket design allows access to fasteners in tight spaces.

Tekton impact sockets meet or exceed ANSI performance standards. Tekton impact sockets efficiently transfer torque from impact wrench to fastener, loosening the most stubborn nuts and bolts. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Even in low light, the high-contrast, permanent laser etched size markings are easy-to-read.

Meets or exceeds ANSI performance standards. Built for use with impact tools, these TEKTON 3/8 in. Molded size markings keeps set organized and identifies any missing sockets. Set includes:13 3/8 in. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Through-hole in drive ends locks onto drive tang.




Similar products

---

TEKTON 3/8-Inch Drive Deep Impact Socket Set, Inch, Cr-V, 6-Point, 5/16-Inch - 1-Inch, 12-Sockets | 47920

Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Made of premium chrome vanadium steel with a protective black oxide finish. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Meets or exceeds ANSI performance standards.

Engineered for use with impact drivers. High-contrast permanent laser etched size markings are easy-to-read, even in low light. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces.

. Works around obstructions to access hard-to-reach fasteners. High-contrast permanent laser etched size markings are easy-to-read, even in low light. An extra-deep broach enables you to access the entire length of fasteners. Built for use with impact tools, these TEKTON 3/8 in. Meets or exceeds ANSI performance standards.

High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Extra-deep broach accommodates longer fasteners.


Similar products

---

TEKTON 4957 Impact Adapter and Reducer Set, Cr-V, 4-Piece

Meets or exceeds ANSI performance standards. Common size combinations multiply the range and capability of your socket system. Engineered for use with impact drivers. Meets or exceeds ANSI performance standards. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Be ready for anything with the TEKTON 4-pc.

Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Drive f to 3/8 in. Through-hole in drive ends locks onto drive tang. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Drive m adapter1 3/8 in. Drive f to 1/4 in. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish.

Drive m reducer1 1/4 in. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. They create solutions for lost or broken sockets, fill the gaps in incomplete size ranges, and extend the capability of your existing socket system.

Meets or exceeds ANSI performance standards.


Similar products

---

TEKTON 4971 1/2-Inch Drive Impact Extension Bar Set, Cr-V, 3-Piece

High-torque, not just the corners, 6-point socket design grips the flat sides of fasteners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. Made of premium chrome vanadium steel with a protective black oxide finish. Meets or exceeds ANSI performance standards. Engineered for use with impact drivers.

Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Extra-deep broach accommodates longer fasteners. Engineered for use with impact drivers. High-torque, not just the corners, 6-point socket design grips the flat sides of fasteners, preventing round-off.

Extra-deep broach accommodates longer fasteners. Engineered for use with impact drivers. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Drive extensions: 3, 6, 8 in.

Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish.


Similar products

---

TEKTON 1457 3/8-Inch Drive by 7-Inch Quick-Release Composite Offset Ratchet, 72-Tooth Oval Head

Sockets lock onto the quick-release drive tang so you don't have to worry about dropping them. Drive direction is easily changed with the thumb-operated reverse switch. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Made of premium chrome vanadium steel with a protective black oxide finish.

Engineered for use with impact drivers. Engineered for use with impact drivers. Made of premium chrome vanadium steel with a protective black oxide finish. The offset handle provides extra finger clearance, preventing scraped knuckles. Meets or exceeds ANSI performance standards. High-torque, not just the corners, 6-point socket design grips the flat sides of fasteners, preventing round-off.

Shallow socket depth provides access to fasteners in tight spaces. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Through-hole in drive ends locks onto drive tang. Offset handle gives fingers extra clearance. Forged and heat treated chrome vanadium steel ratchet head and handle core.

Works around obstructions to access hard-to-reach fasteners.


Similar products

---

Sunex 3301 3/8-Inch Drive Impact Universal Joint, Standard, 6-Point, Cr-Mo

High-contrast permanent laser etched size markings are easy-to-read, even in low light. Meets or exceeds ANSI performance standards. Made of premium chrome vanadium steel with a protective black oxide finish. Universal Joint. Engineered for use with impact drivers. Through-hole in drive ends locks onto drive tang.

Cr-mo alloy steel for long life. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Meets or exceeds ANSI performance standards. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped.

Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Common size used for repairs. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces.

Offset handle gives fingers extra clearance. Common size combinations multiply the range and capability of your socket system.


Similar products

---

TEKTON 3/8-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 12-Point, 7 mm - 19 mm, 13-Sockets | 47916

Meets or exceeds ANSI performance standards. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Drive shallow impact sockets fit in tight spaces effortlessly break free 12-point fasteners commonly found in European cars. High-contrast permanent laser etched size markings are easy-to-read, even in low light.

High-contrast permanent laser etched size markings are easy-to-read, even in low light. Engineered for use with impact drivers. Tekton impact sockets meet or exceed ANSI performance standards. Made from high-strength chrome vanadium steel, our impact sockets are more resistant to drive end round out than standard impact sockets, resulting in a longer useable life.

Through-hole in drive ends locks onto drive tang. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off.

Extra-deep broach accommodates longer fasteners. Engineered for use with impact drivers. Drive shallow 12-point sockets metric: 7, 18, 16, not just the corners, 8, 6-point socket design grips the flat sides of fasteners, 11, 12, 9, 14, 13, 15, 10, 17, 19 mm1 storage case High-torque, preventing round-off.




Similar products

---

TEKTON 1/2-Inch Drive Deep Impact Socket Set, Inch, Cr-V, 6-Point, 3/8-Inch - 1-1/4-Inch, 14-Sockets | 4880

High-impact composite shell stays comfortable in cold temperatures and prevents scratching or marring of finished parts. Meets or exceeds ANSI performance standards. The high-torque, 6-point socket grips the broad, flat sides of nuts and bolts, not just the corners, so there's no need to worry about stripping fastener head or damaging socket.

Drive deepwell 6-point sockets inch: 3/8, 1, 5/8, 9/16, 1-1/4 inch1 storage case high-torque, 7/16, 13/16, 1-1/16, 7/8, 6-point socket design grips the flat sides of fasteners, 11/16, 1-1/8, 3/4, 15/16, not just the corners, 1/2, preventing round-off. Extra-deep broach accommodates longer fasteners. Meets or exceeds ANSI performance standards.

High-torque, not just the corners, 12-point socket design grips the flat sides of fasteners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. An extra-deep broach enables you to access the entire length of fasteners. High-contrast permanent laser etched size markings are easy-to-read, even in low light.

Even in low light, the high-contrast, permanent laser etched size markings are easy-to-read. Forged and heat treated chrome vanadium steel ratchet head and handle core. Engineered for use with impact drivers.


Similar products