AudioDia

The pi2grover board provides 15 Grove connectors for your prototyping needs. 15 grove connectors - 4 grove i2c, 10 grove digital, 1 Grove Serial. Fast prototyping with many, many different Grove devices available. Works perfectly with the grove 4 Channel 16 Bit ADC from SwitchDoc Labs. It plugs right into your raspberry Pi with a special connector that allows you to plug boards or hats on top of the Grove board.

. 10 grove digital, 4 grove I2C, and one Grove UART. On board status LEDS for Power and I2C. Full documentation for Raspberry Pi on www. Switchdoc. Com. No software required. It just works! Includes 3. 3v to 5v bi-directional buffering. No software drivers required. You are right next to the hardware.

---

Grove I2C 4 Ch / 16 Bit Analog to Digital Converter for Raspberry Pi / Arduino / ESP8266

On board status lEDS for Power and I2C activity. The lack of an analog to Digital Converter is a pain on the Raspberry Pi. You want to read those real world signals all the time and we didn't have a good way of doing it. Switchdoc labs designed the Grove4Ch16BitADC board board to fulfill the need. And not one really workable ADC for the Grove existed until now.

4 channels of 16 bit analog to Digital Conversion based on TI ADS1115. The grove 4 ch 16bit adc connects to a Grove I2C connector and supplies 4 channels of Grove Analog plugs for your projects. Full documentation for Raspberry Pi on www. Switchdoc. Com. Comes with open source drivers for the Raspberry Pi, ESP8266 and the Arduino.

Works perfectly with the Pi2Grover Grove Interface to the Raspberry Pi. It brings   4 channels of 16 bit Analog to the Raspberry Pi, Arduino and the ESP8266. Based on the industry standard ADS1115 IC.


Similar products

---

Cables-Grove - 4 Pin Female Jumper To Grove 4 Pin Conversion Cable 5 Pcs Per Pack

On board status lEDS for Power and I2C activity. Some devices have pin headers that cannot connect directly to Grove connectors on the Raspberry Pi and Arduino. 20cm with Buckled Grove Connector. Note: the Grove side uses buckled connector. For all grove users especially beginners, we provide you guidance documents.

Length of each wire is 20cm. Full documentation for Raspberry Pi on www. Switchdoc. Com. 5 cables are included in one pack. Full documentation and Software for Raspberry Pi and Arduino on www. Switchdoc. Com. 4 channels of 16 bit analog to Digital Conversion based on TI ADS1115. Converts grove Connector to Pin Headers.

Works perfectly with the Pi2Grover Grove Interface to the Raspberry Pi. The grove to female jumper for male Pin Headers Cable Converter has a Grove connector and feeds to 4 Pin 2. 54 female jumper wires. 5 pieces per Pack. Comes with open source drivers for the Raspberry Pi, ESP8266 and the Arduino.


Similar products

---

Grove - Universal 4 Pin Buckled 20cm Cable 5 PCs pack

5 pieces per Pack. On board status lEDS for Power and I2C activity. 5 pieces per Pack. 4 channels of 16 bit analog to Digital Conversion based on TI ADS1115. Converts grove Connector to Pin Headers. Full documentation and Software for Raspberry Pi and Arduino on www. Switchdoc. Com. See other Grove parts at www. Switchdoc.

Com. 20cm with Buckled Grove Connector. Supports Raspberry Pi and Arduino. 20cm with Buckled Grove Connector. Converts grove Connector to Grove Connecter. Works perfectly with the Pi2Grover Grove Interface to the Raspberry Pi. Comes with open source drivers for the Raspberry Pi, ESP8266 and the Arduino. The universal 4 pin buckled 20cm cable is made for the Grove Connection System to connect Grove Devices to your computer using Grove connectors - Basic Shield or to other Grove compatible computers for quick prototyping.

Full documentation for Raspberry Pi on www. Switchdoc. Com. Supports Raspberry Pi and Arduino.


Similar products

---

Grove I2C Sunlight Sensor / UV / IR

I2c interface 3. 3v - 5V. The board contains an i2c grove connector ready to plug into your Pi or Arduino Comes with open source drivers for the Raspberry Pi, ESP8266 and the Arduino. Converts grove Connector to Grove Connecter. This device offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight.

No soldering! . Supports Raspberry Pi and Arduino. On board status lEDS for Power and I2C activity. Supports Raspberry Pi and Arduino. 5 pieces per Pack. Includes downloadable software for Raspberry Pi and Arduino. Converts grove Connector to Pin Headers. The grove sunlight and uv i2C sensor can monitor sunlight intensity, IR intensity and UV intensity.

20cm with Buckled Grove Connector. Prototype your IOT devices quickly. 5 pieces per Pack. The sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light. Works perfectly with the Pi2Grover Grove Interface to the Raspberry Pi. See other Grove parts at www.




Similar products

---

WeatherPiArdinuo V3 w/Grove aka Weather Board connectors - Interface board for Weather Instruments for Raspberry Pi / Arudino

Supports Raspberry Pi and Arduino. Converts grove Connector to Pin Headers. Includes open source Software for Arduino and Raspberry Pi. 5 pieces per Pack. Weatherpiarduino is an assembled board includes bmp280 barometer and ds3231 RTC designed to interface Raspberry Pi's and Arduinos with the SwitchDoc Labs WeatherRack, the SparkFun Weather Meters and the Argent Data Systems Weather Sensors.

Works perfectly with the Pi2Grover Grove Interface to the Raspberry Pi. I2c interface 3. 3v - 5V. 20cm with Buckled Grove Connector. Includes on-board barometer and temperature sensors. Software provided for all supported sensors and for all supported I2C devices including Lightning Detector! Includes ds3231 rtc.

See other Grove parts at www. Switchdoc. Com. Includes downloadable software for Raspberry Pi and Arduino. Supports a variety of i2c devices: lightning detector / fram storage / switchDoc Labs DS3231 RTC / Adafruit HTU210 Humidity Sensor / Adafruit ADS1015 ADC. Supports anemometer / wind vane / rain bucket SwitchDoc Labs WeatherRack, Argent Data Systems Weather Sensors and Sparkfun Weather Meters.




Similar products

---

Grove - Universal 4 Pin Buckled 50cm Cable 5 PCs Pack

Converts grove Connector to Pin Headers. No soldering! Includes open source Software for Arduino and Raspberry Pi. Supports a variety of i2c devices: lightning detector / adafruit htu210 Humidity Sensor / SwitchDoc Labs DS3231 RTC / FRAM Storage / Adafruit ADS1015 ADC. Supports anemometer / wind vane / rain bucket SwitchDoc Labs WeatherRack, Argent Data Systems Weather Sensors and Sparkfun Weather Meters.

Converts grove Connector to Grove Connecter. The universal 4 pin buckled 50cm cable is made for the Grove Connection System to connect Grove Devices to your computer using Grove connectors - Basic Shield or to other Grove compatible computers for quick prototyping. Supports Raspberry Pi and Arduino. Includes on-board barometer and temperature sensors.

Converts grove Connector to Grove Connecter. See other Grove parts at www. Switchdoc. Com. Prototype your IOT devices quickly. 20cm with Buckled Grove Connector. 20cm with Buckled Grove Connector. 5 pieces per Pack.


Similar products

---

AM2315 - Encased I2C Temperature/Humidity Sensor for Raspberry Pi/ Arduino

Converts grove Connector to Pin Headers. 20cm with Buckled Grove Connector. The am2315 i2c capacitive humidity sensing digital temperature and humidity sensor is contains a temperature and humidity combined sensor calibrated digital signal device. Supports a variety of i2c devices: lightning detector / adafruit htu210 Humidity Sensor / FRAM Storage / SwitchDoc Labs DS3231 RTC / Adafruit ADS1015 ADC.

Supports anemometer / wind vane / rain bucket SwitchDoc Labs WeatherRack, Argent Data Systems Weather Sensors and Sparkfun Weather Meters. Converts grove Connector to Grove Connecter. 5 pieces per Pack. On board status lEDS for Power and I2C activity. 20cm with Buckled Grove Connector. Software provided for all supported sensors and for all supported I2C devices including Lightning Detector!

I2c interface 3. 3v - 5V. It uses special temperature and humidity acquisition technology, to ensure that the sensor has high reliability and excellent long-term stability. See other Grove parts at www. Switchdoc. Com.


Similar products

---

Grove/Pin Headers I2C 4 Channel Mux Extender / Expander Board for Arduino and Raspberry Pi

The scl/sda controlling fans out to four downstream channels. Supports arduino 5. 0v i2c and raspberry pi 3. 3v i2c. 5 pieces per Pack. No soldering! On board status lEDS for Power and I2C activity. See other Grove parts at www. Switchdoc. Com. And we love I2C devices. Converts grove Connector to Grove Connecter. 50cm with Buckled Grove Connector.

Expands and Extends I2C busses. 4 channels of 16 bit analog to Digital Conversion based on TI ADS1115. Software drivers provided for Arduino and Raspberry Pi. You can have any combination of 3. 3v and 5v i2c busses on this board. What is the solution for this? it's an I2C controlled 4 I2C bus multiplexer! We have both Grove Connectors and traditional pin headers.

Includes downloadable software for Raspberry Pi and Arduino. Full documentation and Software for Raspberry Pi and Arduino on www. Switchdoc. Com. It works for both the Arduino and Raspberry Pi.


Similar products

---

USB to USB solid state relay for Raspberry Pi and Arduinos - USB PowerControl board

Supports Raspberry Pi and Arduino. 5 pieces per Pack. If it is hiGH above 3. 8v the usb port is turned on and you have 5V of power to the USB plug. I2c device to Measure Temperature and Humidity. This board was initially designed to sit in-between a Solar Power Controller such as SunAir/SunAirPlus and a Raspberry Pi / Arduino.

Includes Grove Cable. This is an excellent board to shut on and off USBpo wered devices like a Raspberry Pi and Arduino. Implements hysteresis on control - 3. 8v/3. 3v turn on/off Voltage on Control Line. The input to the board was designed to come directly from a LiPo battery so the computer won't be turned on until the LiPo battery was charged up above 3.

8v. Supports arduino 5. 0v i2c and raspberry pi 3. 3v i2c. Can be connected to GPIO Pin or directly to LiPo Battery. Full documentation and Software for Raspberry Pi and Arduino on www. Switchdoc. Com.


Similar products

---

WeatherRack - Anemometer / Wind Vane / Rain Bucket designed for SwitchDoc Labs WeatherPiArduino Board and Raspberry Pi/Arduino

Over current protection, Thermal Shutdown, Reverse Current Blocking. Full documentation and Software for Raspberry Pi and Arduino on www. Switchdoc. Com. This product can be interfaced into your own project, but the SwitchDoc Labs WeatherPiArduino is specifically designed for the WeatherRack. Includes ds3231 rtc.

Software provided for all supported sensors and for all supported I2C devices including Lightning Detector! Supports Raspberry Pi and Arduino. See other Grove parts at www. Switchdoc. Com. No soldering!20cm with Buckled Grove Connector. Includes open source Software for Arduino and Raspberry Pi. Full documentation and Software for Raspberry Pi and Arduino on www.

Switchdoc. Com. Converts one i2c bus on pi or arduino to 4 separate I2C buses. Can switch the power to any uSB device plugged into the Female A USB port On/Off. 5 pieces per Pack.


Similar products