Overfly Ardupilot Flight Controller Board On-Screen Display APM OSD MinimOSD、OSD Board MinimOSD APM Telemetry to APM2.0 APM2.5 APM 1 APM 2 /On-Screen Display APM OSD MinimOSD Ardupilot Flight Controller Board

#ad
Overfly #ad - Dimensions: 07"w x 1. 7"l 2. 4" w/ pins as shown x 03"h. Package list: 1 x MinimOSD Board. Description osd board minimOSD APM Telemetry to APM2. 0 apm2. 5 apm 1 apm 2 on-screen display apm osd minimosd ardupilot flight controller board specification: atmega328p with arduino bootloader max7456 monochrome on-screen display FTDI cable compatible pinout Standard 6-pin ISP header Two independent power sections with an LED indicator on each Solder jumpers for combining the power sections +5V 500mA regulator for up to +12V supply input Solder jumper for PAL video option Exposed test points for HSYNC and LOS Dimensions: 0

7"w x 1. 7"l 2. 4" w/ pins as shown x 03"h package list: 1 x minimoSD Board Standard 6-pin ISP header. Solder jumper for PAL video option. Two independent power sections with an LED indicator on each.

More information about Overfly #ad

5V - FTDI Basic Breakout

#ad
SparkFun DEV-09716 #ad - Description: this is the newest revision of our FTDI Basic. The dtr pin allows an Arduino target to auto-reset when a new Sketch is downloaded. We now use a smd 6-pin header on the bottom, which makes it smaller and more compact. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable.

This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled blk and GRN correspond to the colored wires on the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use the auto-reset feature rocks!

5V - FTDI Basic Breakout #ad - This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. The black wire on the fTDI cable is GND, green is CTS. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications.

This board ship default to 5v, but you can cut the default trace and add a solder jumper if you need to switch to 3. 3v now uses a smd 6-pin header on the bottom, which makes it smaller and more compact.

More information about SparkFun DEV-09716 #ad


Similar products



Micro USB FTDI Basic Breakout Module for Arduino 3.3V/5V

#ad
Tinysine LYSB00N4MCS1A-CMPTRACCS #ad - The pinout of this board matches the FTDI cable to work with Arduino boards. This is a basic breakout board for the FTDI FT232RL USB to serial IC. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. This board was designed to decrease the cost of Arduino development and increase ease of use the auto-reset feature rocks!

Now uses a smd 6-pin header on the bottom, which makes it smaller and more compact. 3. 3v/5v adjustable. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. The pins labeled blk and GRN correspond to the colored wires on the FTDI cable. The black wire on the fTDI cable is GND, green is CTS.

Micro USB FTDI Basic Breakout Module for Arduino 3.3V/5V #ad - The dtr pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This board has tx and rx leds that make it a bit better to use over the FTDI cable. Use these blk and grn pins to align the FTDI basic board with your Arduino target. The newest revision of our ftdi basic with micro USB port, which use a 6-pin header on the bottom, smaller and more compact.

It can also be used for general serial applications.

More information about Tinysine LYSB00N4MCS1A-CMPTRACCS #ad


Similar products



Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug

#ad
Anbee #ad - Precision manufactured and 100% tested. Plug type: rp-sma Plug for both receiver and transmitter. Runs on 5. 8 ghz commonly used for FPV. Greatly increases video and audio signal. Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional.

Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. Package list: 1x 3-blades antenna for tx 1x 4-blades antenna for RX Now uses a smd 6-pin header on the bottom, which makes it smaller and more compact. 3. 3v/5v adjustable. Circularly polarized for reduced interference.

Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug #ad - Clover-leaf style antenna / Omni-directional.

More information about Anbee #ad


Similar products



yueton 30Pairs 3.5mm Male Female Banana Plug Bullet Connector Replacements

#ad
yueton CECOMINOD016801 #ad - Low resistance, and gives the best electric flow. High quality gold tone color. Size: 3. 5*12mm d*H. Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package.

Precision manufactured and 100% Tested. Male and female banana bullet connector. Male female banana plug pack of 30 pairs, 30pcs male plugs and 30pcs female plugs Color: gold Size: 3. 5*12mm d*h material: metal capable of optimizing current flow Now uses a smd 6-pin header on the bottom, which makes it smaller and more compact.

yueton 30Pairs 3.5mm Male Female Banana Plug Bullet Connector Replacements #ad - 3. 3v/5v adjustable. Package includes: 30pcs male plugs and 30pcs female plugs.

More information about yueton CECOMINOD016801 #ad


Similar products



Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red

#ad
Pixnor #ad - Color: mainly red. Adopt aluminum turning and CNC manufacturing for durable to use. High quality gold tone color. Description the item is a professional and practical GPS folding antenna base mount holder set, which mainly adopts aluminum turning and CNC manufacturing for durable to use, and is suitable for most DJI quadcopter and multicopter.

Rod diameter: about 4mm, Height: about 16. 2cm. Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. Male and female banana bullet connector.

Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red #ad - Material: durable aluminum. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use.

More information about Pixnor #ad


Similar products



HiLetgo FT232RL FTDI USB to TTL Serial Converter Adapter Module for Arduino 3.3V 5.5V FT232R Breakout FT232RL USB to serial USB to TTL Adapter Board module

#ad
HiLetgo 3-01-0661-1 #ad - Low resistance, and gives the best electric flow. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use. Support 3. 3v, 5.

5v. High quality gold tone color. Features: 100% brand new Support 3. 3v, 5. 5v chipset ft232rl now uses a smd 6-pin header on the bottom, which makes it smaller and more compact. 3. 3v/5v adjustable. Package includes: 30pcs male plugs and 30pcs female plugs. Anbee® circularly Polarized for Reduced Interference. Runs on 5.

HiLetgo FT232RL FTDI USB to TTL Serial Converter Adapter Module for Arduino 3.3V 5.5V FT232R Breakout FT232RL USB to serial USB to TTL Adapter Board module #ad - 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested.

More information about HiLetgo 3-01-0661-1 #ad


Similar products



BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC

#ad
BW #ad - High quality gold tone color. Suit for various kinds of flight controller, KK, like APM 2. 5/2. 6, mwc. Material: Glass fiber. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use.

Easy to install and use. Support 3. 3v, 5. 5v. Low resistance, and gives the best electric flow. Weight: 25g. Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package.

BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC #ad - Precision manufactured and 100% Tested. Male and female banana bullet connector. Material: Glass fiber 3. Suit for different various kinds of flight controller, like APM 2.

More information about BW #ad


Similar products



D4R-II Receiver 4 Channel ACCST w/ Telemetry and 8 Channel CPPM w/ RSSI

#ad
FrSky #ad - Suit for various kinds of flight controller, KK, like APM 2. 5/2. 6, mwc. Material: Glass fiber. This is the receiver to use with a taranis transmitter and a naze32 or mullet flight controller due to the incredibly simple telemetry integration - 3 wires to the FC, and you will be able to read RSSI/signal strength, with a full Naze/Mullet altitude, battery voltage, and with a GPS attached GPS coordinates.

Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use. Support 3. 3v, 5. 5v. Weight: 25g. Anbee® circularly Polarized for Reduced Interference.

D4R-II Receiver 4 Channel ACCST w/ Telemetry and 8 Channel CPPM w/ RSSI #ad - Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional.

More information about FrSky #ad


Similar products



Dragonpad 32Ch 5.8G 600mw 5km Wireless AV Transmitter TS832 Receiver RC832 for FPV

#ad
China OEM RC832+TS832 #ad - Boscam 5. 8ghz 32ch fpv system with 600mw av transmitter TX 5KM & Rx Wireless 5. 8g av receiver system 32 Channel 5. 8 ghz 600mw av wireless transmitter and Rx Wireless 5. 8g av receiver reliable fpv system is perfect for those living in densely populated areas with too many other frequencies in the air. Long range more than 5km range in the open area - Plug and play.

Power off memory: Replay the very last frequency band and channel. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use.

Dragonpad 32Ch 5.8G 600mw 5km Wireless AV Transmitter TS832 Receiver RC832 for FPV #ad - Support 3. 3v, 5. 5v. Size: 3. 5*12mm d*H. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadrocopter, airplane and boat etc. Features 4 bands and all frequencies compactable: cover a, b, e bands and f band airwave band two button switching: ch button for frequencies channels switching and fr button for frequencies bands switching Two digits display: one for FR and the other for CH, real-time positioning shows which frequency band and which channel is received Power memory function: remembers the last frequency band and channel Independent video and audio signal outputs Support for both NTSC and PAL formats Antenna connection: RP-SMA, jack module side for TX and RX Transmitter Specifications: 600mW AV TX 5KM Power input: 7.

More information about China OEM RC832+TS832 #ad


Similar products



FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS

#ad
FrSky NPH-01266 #ad - Size: 3. 5*12mm d*H. Long range more than 5km range in the open area - Plug and play. Package includes: 30pcs male plugs and 30pcs female plugs. 4smart port enabled, realizing two-way full duplex transmission. 5frsky Brand. Excellent ultralight only 5. 8g, full range, telemetry enabled, 2.4 ghz diversity receiver. Supports 4 channel pwm or 8 channel CPPM and RSSI PWM.

Now uses a smd 6-pin header on the bottom, which makes it smaller and more compact. 3. 3v/5v adjustable. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. 3with rssi pwm output 0~3. 3v 4smart port enabled, realizing two-way full duplex transmission. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadrocopter, airplane and boat etc.

FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS #ad - 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. 2parallel two x8R to become a 16 channel receiver.

More information about FrSky NPH-01266 #ad


Similar products