AudioDia

Qtd assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions. Class a/b sounds better, but the PC boards require a bit more space that in other circuit topologies. The crb fuse holder has been specially plated with nickel for corrosion protection against the elements.

Crunch powerx incorporates full Class A/B technology in stereo and four channel amplifiers along with Class D in the mono. We are an authorized Crunch Dealer! Crunch px-10002 2 channel Car Amplifier. 2-ohms: 2 x 500 Watts. 4-ohms: 2 x 250 Watts. Mono-bridged @ 4 ohms: 1 x 1000 Watts. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor.

These high-performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. This crunch PX-10002 2 channel amplifier is a perfect entry level amplifier for you car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion.

. Class a/B Amplifier.

---

Boss Audio KIT2 8 Gauge Amplifier Installation Kit with High Performance RCA Interconnect and Speaker Wire

6 ft. 20 ft. 18 ga blue turn-On Wire, 3 ft. 8 ga black Ground Cable. 8 ga red power cable, 16 ft. Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. 8 gauge amplifier installation kit. Competition quality fuse holder with agu Fuse Plus No. 10, 5/16-inch and 1/4-Inch Ring Terminals. 8 gauge amplifier installation kit includes: 30 ft of Speaker Wire.

.


Similar products

---

PAC SNI-35 Variable LOC Line Out Converter

Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input. It allows 50 watts maximum input per channel and has a linear 20Hz to 20, 000Hz output based on input signal. The transformer isolated for optimal sound and performance.

20 ft. 30 ft of Speaker Wire. Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. The sni-35 adjustable 2-channel line-out converter from pac audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.

5 db linearity from 20 - 20, 000 Hz. Phase Adjusted. Utilize audio Transformer for Noise Isolation. 8 ga red power cable, 16 ft. 8 ga black Ground Cable. Competition quality fuse holder with agu Fuse Plus No. 10, 5/16-inch and 1/4-Inch Ring Terminals. The unit maintains correct phasing and works with most factory-installed radios.

6 ft.


Similar products

---

Kicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter

8 ga black Ground Cable. 6 ft. 8 ga red power cable, 16 ft. 5 db linearity from 20 - 20, 000 Hz. 2-channel k-series speaker cable to RCA Adapter with Line Out Converter 30 ft of Speaker Wire. Adjustable Line Output Converter. K-series Interconnect Cable. 18 ga blue turn-On Wire, 3 ft. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.

K-grip dual-mold connectors offer sure grip. Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. Competition quality fuse holder with agu Fuse Plus No. 10, 5/16-inch and 1/4-Inch Ring Terminals. Utilize audio Transformer for Noise Isolation. World's first micro surface mount line-out converter. Two channel Speaker to RCA.

Split pin rca with silver tinned OFC wire. 8 gauge amplifier installation kit. 20 ft. Phase Adjusted.


Similar products

---

crunch PX1000.4 Power Amplifier Class Ab, 4 Channels, 1,000 Watts

8 gauge amplifier installation kit. Qtd quick thermal Dispersion technology heat sink Low-noise preamp. Adjustable Line Output Converter. Competition quality fuse holder with agu Fuse Plus No. 10, 5/16-inch and 1/4-Inch Ring Terminals. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.

Class ab bridgeable variable input voltage qtd quick thermal dispersion technology Heat Sink Low-Noise Preamp High-Level Inputs Low-Level Rca Inputs & Outputs 2- & 3-Channel Operation Modes Built-In Variable Electronic Crossover  30 ft of Speaker Wire. 20 ft. 18 ga blue turn-On Wire, 3 ft. Phase Adjusted. Utilize audio Transformer for Noise Isolation.

5 db linearity from 20 - 20, 000 Hz. K-series Interconnect Cable. Two channel Speaker to RCA. High-level inputs. 8 ga red power cable, 16 ft. 6 ft.


Similar products

---

Pair of KICKER 10C104 Comp 10" 600 Watt 4 Ohm Car Subwoofers Combo C10 10C10-4

Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. K-series Interconnect Cable. The comp is also versatile, performing in vented or sealed enclosures, and in free-air applications as well. The comp makes perfect sense for any factory upgrade. Split pin rca with silver tinned OFC wire. With easy-to-use, and yellow double-stitched surround, nickel-plated push terminals, updated steel basket, a resilient, the Comp looks as good as it sounds.

World's first micro surface mount line-out converter. Low-level RCA inputs & outputs. High-level inputs. Two channel Speaker to RCA. 8 gauge amplifier installation kit. 8 ga red power cable, 16 ft. Phase Adjusted. Kicker provides the best bass for the buck with the KICKER Comp Subwoofer. Pair of kicker 10c104 comp 10" 500 watt 4 ohm car subwoofers combo c10 10c10-4 kicker provides the best bass for the buck with the KICKER Comp Subwoofer - all the legendary KICKER bass, and still the world's greatest value.

Qtd quick thermal Dispersion technology heat sink Low-noise preamp. It's equipped with all of the proven kickER construction that you expect, and with an impressive updated look, the KICKER Comp is the complete package. 20 ft.


Similar products

---

Rockford Fosgate R2 Ultra Shallow 10-Inch 4 Ohm DVC Subwoofer

8 ga red power cable, 16 ft. 6 ft. K-grip dual-mold connectors offer sure grip. Two channel Speaker to RCA. Competition quality fuse holder with agu Fuse Plus No. 10, 5/16-inch and 1/4-Inch Ring Terminals. Linear spider with stitched 16 AWG tinsel leads. 8 ga black Ground Cable. Qtd quick thermal Dispersion technology heat sink Low-noise preamp.

Strong steel basket with coil-cooling perimeter venting - Ribbed surround for strength at high excursion. 400w power Handling. World's first micro surface mount line-out converter. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.

High-level inputs. Split pin rca with silver tinned OFC wire. Durable spiralead tinsel leads - Tough, yellow double-stitching on surround - Handy spring-loaded terminals. Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. Stamp-cast basket with integrated spider venting. 5 db linearity from 20 - 20, 000 Hz.

K-series Interconnect Cable.


Similar products

---

Bbox 12-Inch Single-Sealed Truck Enclosure

Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. 80 speaker hole cutout 11. 12". 5 db linearity from 20 - 20, 000 Hz. Gross cu. High-level inputs. Competition quality fuse holder with agu Fuse Plus No. 10, 5/16-inch and 1/4-Inch Ring Terminals. K-grip dual-mold connectors offer sure grip. 8 ga red power cable, 16 ft.

. K-series Interconnect Cable. Split pin rca with silver tinned OFC wire. 400w power Handling. Utilize audio Transformer for Noise Isolation. 8 gauge amplifier installation kit. Mdf construction speaker face is. 75" body is 5/8". World's first micro surface mount line-out converter. Linear spider with stitched 16 AWG tinsel leads.

Mica injected polypropylene cone. 20 ft. Mounting depth 6. 00" middle / 5. 00" top of speaker hole / 7.


Similar products

---

Metra 95-5812 Double DIN Installation Kit for Select 2004-up Ford Vehicles -Black

Mounting Depth 3. 4". 80 speaker hole cutout 11. 12". Two channel Speaker to RCA. Mounting depth 6. 00" middle / 5. 00" top of speaker hole / 7. 00" bottom. Qtd quick thermal Dispersion technology heat sink Low-noise preamp. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.

. Mdf construction speaker face is. 75" body is 5/8". W 2000" x h15. 25" x top depth 5. 00" bottom depth 8. 37". Linear spider with stitched 16 AWG tinsel leads. Durable spiralead tinsel leads - Tough, yellow double-stitching on surround - Handy spring-loaded terminals. 18 ga blue turn-On Wire, 3 ft. World's first micro surface mount line-out converter.

Painted to match factory dash color. Super-rigid, injection-molded cone with 360-degree back bracing - High-temp coil wire - Vented pole piece for heat dissipation. Low-level RCA inputs & outputs.


Similar products

---

Metra 40-GM10 GM Antenna Adapter

Strong steel basket with coil-cooling perimeter venting - Ribbed surround for strength at high excursion. Phase Adjusted. Split pin rca with silver tinned OFC wire. 20 ft. 18 ga blue turn-On Wire, 3 ft. Gross cu. Qtd quick thermal Dispersion technology heat sink Low-noise preamp. K-series Interconnect Cable. Super-rigid, injection-molded cone with 360-degree back bracing - High-temp coil wire - Vented pole piece for heat dissipation.

Stamp-cast basket with integrated spider venting. Split loom tubing, 3 Rubber Grommets and 20 4" Wire Ties. Linear spider with stitched 16 AWG tinsel leads. Factory antenna to Aftermarket Radio Adapter. Gm factory antenna with mini "barbless" or "barbed" plug to aftermarket radio. Durable spiralead tinsel leads - Tough, yellow double-stitching on surround - Handy spring-loaded terminals.

8 ga black Ground Cable. High-level inputs. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit. 8 ga red power cable, 16 ft. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.




Similar products

---

MTX Audio Terminator Series TNE212D 1,200-Watt Dual 12-Inch Sub Enclosure

Kicker provides the best bass for the buck with the KICKER Comp Subwoofer. Phase Adjusted. High-grade ABS plastic construction. 6 ft. 5/8" mdf construction. 5 db linearity from 20 - 20, 000 Hz. Utilize audio Transformer for Noise Isolation. Mica injected polypropylene cone. 80 speaker hole cutout 11. 12". The terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power.

For select 1988-2006 GM Vehicles. Gm factory antenna with mini "barbless" or "barbed" plug to aftermarket radio. 8 ga black Ground Cable. Just remember not to tell them how much you paid if your system is louder than theirs. Stamp-cast basket with integrated spider venting. Key features dual 12" subwooferssingle 2Ω enclosure1200w max power, 800w peak power, 400W RMSAviation Grade Carpet5/8" MDF ConstructionIdeal for Use with MTX THUNDER500

1 amplifier 30 ft of Speaker Wire. Super-rigid, injection-molded cone with 360-degree back bracing - High-temp coil wire - Vented pole piece for heat dissipation. Split pin rca with silver tinned OFC wire.


Similar products