AudioDia

With 14ths, 24ths, 20ths, and 32nds thread checking scales. For 60 degree threads. Threads, 24ths, 20ths, Embossed scales: 14ths, and 32nds. Hardened with lapped edges and notches. Mitutoyo center Gage, Use for: 60 Deg. Use to grind and position thread cutting tool on a lathe.

---

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Top quality M2 HSS. Sizes 1, 2, 4 and 5, 3, 60° tip angles. Top quality m2 hss drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock.

.


Similar products

---

Brown & Sharpe 599-4816 48-Piece Thread Measuring Wire Set

The set includes wires with the following diameters: 0018", 0024", 0029", 0032", 0040", 0045", 0055", 0063", 0072", 0081", 0092", 0108", 0120", 0127", 0143", and 0185". Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. A 1" long center section of each wire is ground to nominal size within 0

00015". The wires are steel for durability and are packed in a plastic pouch that has slots marked for each size. The company, founded in 1833, is headquartered in North Kingstown, RI. Sizes 1, 4 and 5, 2, 3, 60° tip angles. Set of 48 wires in 16 different diameters-three of each size-for measuring and verifying 60 degree pitch diameter of inch, metric, and Acme threaded fasteners.

What's in the Box?3 0018" diameter wires3 0024" diameter wires3 0029" diameter wires3 0032" diameter wires3 0040" diameter wires3 0


Similar products

---

Grip Thread Pitch Gauge MM & SAE

Packed in a plastic sleeve with slots marked for each wire size. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Measures drill bits from 1/16" to 1/2". 1" long center section of each wire is ground to nominal size within 000015". Heavy duty gauge steel. Wires are steel for durability.

Use to provide the correct size of a drill bit, or can be used to size a fastener to determine what bit should be used with it. Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\. Sizes 1, 2, 3, 4 and 5, 60° tip angles.

Set of 48 wires in 16 different diameters-three of each size-for measuring and verifying 60 degree pitch diameter of inch, metric, and Acme threaded fasteners. Top quality M2 HSS. Measures inch threads from 3 to 48 threads per inch, metric threads from 05 to 6mm, and acme threads from 3 to 16 threads per inch.

.


Similar products

---

Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip

Sizes 1, 2, 3, 4 and 5, 60° tip angles. Set of 48 wires in 16 different diameters-three of each size-for measuring and verifying 60 degree pitch diameter of inch, metric, and Acme threaded fasteners. Top quality M2 HSS. Used in a milling machine to find the workpiece edge. Use to provide the correct size drill bit, or to size fastener to determine what bit should to use.

Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\. Packed in a plastic sleeve with slots marked for each wire size. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. All working surfaces are hardened and ground. Wires are steel for durability. Mitutoyo edge finder, shank Dia: 3/8", Tip Dia:.

200". 1" long center section of each wire is ground to nominal size within 000015". Measures inch threads from 3 to 48 threads per inch, metric threads from 05 to 6mm, and acme threads from 3 to 16 threads per inch.


Similar products

---

Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip

Mitutoyo edge/center Finder with 3/8" Shank Diameter, 0200" tip diameter, and cone-shaped center finder. All working surfaces are hardened and ground. Used in a milling machine to find the workpiece edge. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Set of 48 wires in 16 different diameters-three of each size-for measuring and verifying 60 degree pitch diameter of inch, metric, and Acme threaded fasteners.

All working surfaces are hardened and ground. Top quality M2 HSS. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Packed in a plastic sleeve with slots marked for each wire size. 1" long center section of each wire is ground to nominal size within 000015".

Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Used in a milling machine to find the workpiece edge. Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\.




Similar products

---

Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide

Reversible for male and female hole centering. Used in a milling machine to find the workpiece edge. Measures inch threads from 3 to 48 threads per inch, metric threads from 05 to 6mm, and acme threads from 3 to 16 threads per inch. Case-hardened steel with knurled body for durability and secure handling. All working surfaces are hardened and ground.

The company, founded in 1833, is headquartered in North Kingstown, RI. What's in the box?tap guidePlastic storage case Top quality M2 HSS. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Used in a milling machine to find the workpiece edge. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle.

The body has a 1/2" body diameter and is constructed of case-hardened steel for durability and has a knurled body to ensure secure handling. All working surfaces are hardened and ground. Wires are steel for durability. The brown & sharpe 599-792-30 adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations.

1/2" body diameter. Sizes 1, 2, 4 and 5, 3, 60° tip angles.


Similar products

---

How to Run a Lathe: The Care and Operation of a Screw Cutting Lathe

South bend lathe Works sent out this manual with every Lathe they sold. Case-hardened steel with knurled body for durability and secure handling. 1/2" body diameter. 2013 reprint of 1942 Edition. 1" long center section of each wire is ground to nominal size within 000015". This is the lathe manual that Dave Gingery raves about.

Measures inch threads from 3 to 48 threads per inch, metric threads from 05 to 6mm, and acme threads from 3 to 16 threads per inch. Reversible for male and female hole centering. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle. Use to provide the correct size drill bit, or to size fastener to determine what bit should to use.

Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\. Packed in a plastic sleeve with slots marked for each wire size. You get everything you need to set up a lathe and get it running. Profusely illustrated. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Sizes 1, 4 and 5, 3, 2, 60° tip angles.


Similar products

---

84 TPI, 51 Leaves - Mitutoyo 950-253, Screw Pitch Gage, 4

All working surfaces are hardened and ground. 1/2" body diameter. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Top quality M2 HSS. 1" long center section of each wire is ground to nominal size within 000015". Use to provide the correct size drill bit, or to size fastener to determine what bit should to use.

Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\. Sizes 1, 2, 4 and 5, 3, 60° tip angles. Set of 48 wires in 16 different diameters-three of each size-for measuring and verifying 60 degree pitch diameter of inch, metric, and Acme threaded fasteners. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle.

Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground. Reversible for male and female hole centering. Mitutoyo screw pitch gage, number of leaves: 51, Thread pitch: 4 to 84 TPI. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

With locking clamp. Measures inch threads from 3 to 48 threads per inch, metric threads from 0


Similar products

---

Mighty Mag Magnetic Base

Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground. Made in USA. Magnet always on. Wires are steel for durability. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

1" x 1 1/4" x 4 1/2". Top quality M2 HSS. Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\. Solid Magnetic Base. Sizes 1, 4 and 5, 2, 3, 60° tip angles. Set of 48 wires in 16 different diameters-three of each size-for measuring and verifying 60 degree pitch diameter of inch, metric, and Acme threaded fasteners.

1/2" body diameter. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle. Each leaf is marked with thread pitch. Mounts in 6 positions.


Similar products

---

Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6"

Case-hardened steel with knurled body for durability and secure handling. Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Heavy duty gauge steel. Measures drill bits from 1/16" to 1/2\. Thin parallel set 1/8" 10 Pair 00002" steel top quality M2 HSS. All working surfaces are hardened and ground.

Used in a milling machine to find the workpiece edge. Each parallel is 1/8" thick x 6" long with 2 holes. 1/2" body diameter. Our part # all-54100 Each leaf is marked with thread pitch. Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Wires are steel for durability. Includes 10 pairs of the following heights: 1/2", 7/8", 1-3/8", 1", 3/4", 5/8", 1-1/8", 1-1/4", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

Used in a milling machine to find the workpiece edge.


Similar products