AudioDia

We've also added a ptc fuse and diode protection to the power circuit and corrected the RX and TX LED circuit. There is a voltage regulator on board so it can accept voltage up to 9V DC. Note: when you open the arduino iDE software, pls go to the Tool and choose the board "Arduino Leonardo" 1. The usb transceiver inside the 32u4 allows us to add USB connectivity on board and do away with bulky external USB interface 2.

If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. The pro micro is similar to the Pro mini except with a ATmega32U4 on board. 3. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. On-board micro-USB connector for programming.

This tiny little board does all of the neat-o arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. 4 x 10-bit ADC pins. Running at 16mhz and 5v, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.

12 x digital I/Os. Supported under Arduino IDE v1.

---

OSOYOO Pro Micro ATmega32U4 5V/16MHz Module Board with 2 row pin header for arduino Leonardo Replace ATmega328 Arduino Pro Mini

Running at 16mhz and 5v, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. Note: when you open the arduino ide software, pls go to the Tool and choose the board "Arduino Leonardo" 1. We've also added a ptc fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.

This tiny little board does all of the neat-o arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. The pro micro is similar to the Pro mini except with a ATmega32U4 on board. Feature: atmega32u4 running at 5V/16MHz Supported under Arduino IDE v1.

01 recommand power supply for board: 6-7v, less than 9v on-board micro-usb connector for programming 4 x 10-bit adc pins 12 x digital i/Os 5 are PWM capable Rx and Tx Hardware Serial Connections Our Smallest Arduino-Compatible Board Yet Package includes: 1 x OSOYOO Pro Micro ATmega32U4 Module for Arduino Atmega 32u4 running at 5V/16MHz.

If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. Supported under Arduino IDE v1. 01.


Similar products

---

McIgIcM 1n4148,300pcs 1n4148 switching diode Standard 75V 150mA Through Hole DO-35

Supported under Arduino IDE v1. 01. 12 x digital I/Os. Voltage - dc reverse vr max:75vcurrent - average rectified io:150mavoltage - forward vf max @ if:1v @ 10maspeed:small signal =< 200ma io, do-35, f:4pf @ 0v, any speedreverse recovery time trr:4nscurrent - reverse leakage @ vr:5µa @ 75vcapacitance @ Vr, 1MHzMounting Type:Through HolePackage / Case:DO-204AH, AxialSupplier Device Package:DO-35Operating Temperature - Junction:-65°C ~ 175°CWe make professional person test our product to ensure our great quality!We have not authorized to any other seller on Amazon so that we only ensure the quality of us! Atmega 32u4 running at 5V/16MHz.

The use of anti-static packaging products, to avoid the potential harm of static electricity. All products are tested for stability, consistency and reliability. 4 x 10-bit ADC pins. On-board micro-USB connector for programming. Ensure product excellence. This product is widely used in product development, maintenance, student experiments, production, etc.

We are the only brand that is not authorized to any other seller on Amazon!300pcs 1n4148 switching diode standard 75V 150mA Through Hole DO-35.


Similar products

---

SenMod 5PCS Micro SD Card Micro SDHC Mini TF Card Adapter Reader Module for Arduino

Package content: 5 pcs micro sd Card Module Atmega 32u4 running at 5V/16MHz. On-board micro-USB connector for programming. Positioning holes: 4 m2 screws positioning holes with a diameter of 2. 2mm, so the module is easy to install positioning, to achieve inter-module combination. The use of anti-static packaging products, to avoid the potential harm of static electricity.

300pcs 1n4148 switching diode standard 75V 150mA Through Hole DO-35. Level conversion circuit board that can interface level is 5V or 3. 3v. 4 x 10-bit ADC pins. 4 m2 screws positioning holes for easy installation. Positioning holes: 4 M2 screws positioning holes with a diameter of 2. 2mm, so the module is easy to install positioning, to achieve inter-module combination.

Power supply is 4. 5v ~ 5. 5v, 3. 3v voltage regulator circuit board. Ensure product excellence. This product is widely used in product development, student experiments, production, maintenance, etc.


Similar products

---

Elegoo 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

So we can control the quality of our productions by ourselves for you. Ensure product excellence. This product is widely used in product development, maintenance, production, student experiments, etc. We are the only brand that is not authorized to any other seller on Amazon! Level conversion circuit board that can interface level is 5V or 3.

3v. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires Atmega 32u4 running at 5V/16MHz. Communications interface is a standard SPI interface. Positioning holes: 4 m2 screws positioning holes with a diameter of 2. 2mm, so the module is easy to install positioning, to achieve inter-module combination.

Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Including 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

Packing in a bubble envelope. Power supply is 4. 5v ~ 5.


Similar products

---

Industry Park 0.91'' 128x32 IIC I2C 3.3V 5V White OLED LCD Display DIY Module for PIC Arduino

Driver ic: ssd1306 Size: 091 inch oled resolution: 128 x 32 iic interface display color: White Pin Description: GND: Power Ground VCC: Power + DC 3. 3 ~5v scl: clock line sda: data line Package Included: 1 X 091 inch oled lcd display module Atmega 32u4 running at 5V/16MHz. Supported under Arduino IDE v1. 0

1. Power supply is 4. 5v ~ 5. 5v, 3. 3v voltage regulator circuit board. 4 m2 screws positioning holes for easy installation. The use of anti-static packaging products, to avoid the potential harm of static electricity. 4 x 10-bit ADC pins. On-board micro-USB connector for programming. Ensure product excellence. This product is widely used in product development, student experiments, production, maintenance, etc.

We are the only brand that is not authorized to any other seller on Amazon!12 x digital I/Os. Oled display, no need backlight, the display performance is better than the traditional LCD display, self-illumination, also lower consumption.300pcs 1n4148 switching diode standard 75V 150mA Through Hole DO-35.




Similar products

---

Gikfun USB Nano V3.0 ATmega328 CH340G 5V 16M Micro-controller board For Arduino Pack of 3pcs EK1620x3

Supported under Arduino IDE v1. 01. 12 x digital I/Os. The use of anti-static packaging products, to avoid the potential harm of static electricity. Atmega 32u4 running at 5V/16MHz. Power supply is 4. 5v ~ 5. 5v, 3. 3v voltage regulator circuit board. 2. Suit for people above 18 year's old with 1 year electronic diy experience.

We have always cared about the customer experience and improve the product function details. 100% brand new and high quality. Oled display. Self-illumination. No need backlight. Lower consumption. Operating voltagelogic level:5V, Support USB download and Power. On-board micro-USB connector for programming. It's prohibited for any other purpose.

Or use it correctly under the guidance of electronic specializer. Notes: 1. Don't use aged usb cable or aged circuit board to connect Nano V3. 0 board 2.


Similar products

---

Teensy 2.0

We have always cared about the customer experience and improve the product function details. 100% brand new and high quality. Oled display. Self-illumination. No need backlight. Lower consumption. Operating voltagelogic level:5V, Support USB download and Power. Please wear anti-static gloves or bracelet when operate electronic products.

Please keep it in anti-static bag when not use it. Communications interface is a standard SPI interface. Usb can emulate Any Type of Device. 31. 5k flash memory, 2. 5k ram, 1k eePROM. 12 x digital I/Os. 300pcs 1n4148 switching diode standard 75V 150mA Through Hole DO-35. All products are tested for stability, consistency and reliability.

Single Pushbutton Programming. The teensy 2. 0 breaks out all of the io available on the ATMEGA32U4 to breadboard-friendly 01" spaced headers so you can hook up a load of peripherals. Level conversion circuit board that can interface level is 5V or 3.


Similar products

---

HiLetgo New Version NodeMCU LUA WiFi Internet ESP8266 Development

4 x 10-bit ADC pins. Cp2102. Based on eSP8266. Communications interface is a standard SPI interface. 12 x digital I/Os. Level conversion circuit board that can interface level is 5V or 3. 3v. Ensure product excellence. This product is widely used in product development, production, student experiments, maintenance, etc.

We are the only brand that is not authorized to any other seller on Amazon! On-board micro-USB connector for programming. All products are tested for stability, consistency and reliability. Arduino Compatible. Usb can emulate Any Type of Device. Power supply is 4. 5v ~ 5. 5v, 3. 3v voltage regulator circuit board. Hiletgo nodemcu eSP-12E Module.

Hiletgo nodemcu lua wifi internet esp8266 development BoardESP8266 is a highly integrated chip designed for the needs of a new connected world. Please wear anti-static gloves or bracelet when operate electronic products. Please keep it in anti-static bag when not use it. The product is used for learning and test Code.




Similar products

---

10PCS Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New

Usb can emulate Any Type of Device. Positioning holes: 4 m2 screws positioning holes with a diameter of 2. 2mm, so the module is easy to install positioning, to achieve inter-module combination. Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

Including 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Packing in a bubble envelope. Output power, frequency channels, and protocol setup are easily. Built-in power Down and Standby modes makes power saving easily realizable. 4 x 10-bit ADC pins.

Level conversion circuit board that can interface level is 5V or 3. 3v. 12 x digital I/Os. Specification: * 100% quality guarantee; * model:nRF24L01; * nRF24L01 is a single chip radio transceiver for the world wide 2. 4 - 2. 5 ghz ism band. Based on eSP8266.


Similar products

---

5pcs - CHENYANG Ultra Mini DM Micro USB 5pin OTG Adapter Connector for Cell Phone Tablet & USB Cable & Flash Disk

Supported under Arduino IDE v1. 01. We have always cared about the customer experience and improve the product function details. 100% brand new and high quality. Oled display. Self-illumination. No need backlight. Lower consumption. Operating voltagelogic level:5V, Support USB download and Power. Cp2102. 4 x 10-bit ADC pins.

This otg adapter is compatible with most android phones. Make sure your phone support OTG function. This adapter can only used in OTG android phones / tablets. Suitable for/support the standard USB interface, not the thin one. Model: nrf24L01. 31. 5k flash memory, 2. 5k ram, 1k eePROM. On-board micro-USB connector for programming.

Level conversion circuit board that can interface level is 5V or 3. 3v. Based on eSP8266.


Similar products