AudioDia

The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M500/3, M700/5, M200/2, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. 5. 5 m cable. The hd-rlc adjusts your amplifier's level, not its "bass boost, " so you maintain the same bass quality as you turn the volume up and down. The hd-rlc remote level controller works with jl audio's HD Series and XD Series amplifiers and many marine amps, allowing you to manage your level settings from the front of your vehicle.

.

---

600 watts RMS x 1 at 2 ohms - JL Audio XD600/1v2 Mono subwoofer amplifier

3 ohms: 500 watts x 1 chan. Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. Selectable low-pass filter slope: 12 db or 24 db | variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline not supplied. Jl audio xd600/1v2 monoblock 600w rms class d subwoofers speakers amplifier new rms power rating @14.

4v: 4 ohms: 400 watts x 1 chan. 3 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. Dimensions: 7. 09"w x 8. 52"l x 2. 05"h. 2 ohms: 500 watts x 1 chan. Nexdtm high speed switching class d technology | wired HD-RLC remote level control available, sold separately | LED power green, over-current yellow and protect red indicators.

.


Similar products

---

75 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms - JL Audio XD700/5v2 5-channel car amplifier

5-channel car amplifer. Selectable low-pass filter slope: 12 db or 24 db | variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline not supplied. 3 ohms: 240 watts x 1 chan. General features: xdv2 series class D 5-Channel Amplifier RMS Power Rating @14. 4v: channel 1 - 4 4 ohms: 75 watts x 4 chan.

3 ohms: 400 watts x 1 chan. 2 ohms: 100 watts x 4 chan. 200 watts rms x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms. 2 ohms: 300 watts x 1 chan. Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. 100 watts rms x 4 + 300 watts RMS x 1 at 2 ohms. Bridged 4 ohms: 180 watts x 2 chan. 2 ohms: 90 watts x 4 chan. Dimensions: 7.

09"w x 8. 52"l x 2. 05"h. 2 ohms: 500 watts x 1 chan. Nexdtm high speed switching class d technology | wired HD-RLC remote level control available, sold separately | LED power green, over-current yellow and protect red indicators.


Similar products

---

JL Audio XD-PCS4-1B 4-AWG 12-Volt Power Connection for Single Amplifier 100-AMP Capacity

3 ohms: 400 watts x 1 chan. 4 gauge power Amplifier Installation Kit. Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. 100 watts rms x 4 + 300 watts RMS x 1 at 2 ohms. The included premium power/ground cable is made from 100% silver-tinned oxygen-free copper and is true-to-gauge for ultimate power transfer.

Rms power rating @14. 4v: 4 ohms: 400 watts x 1 chan. Selectable low-pass filter slope: 12 db or 24 db | variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline not supplied. This jl audio 4 awg amplifier power connection Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 800 watts.

75 watts rms x 4 + 180 watts RMS x 1 at 4 ohms. 10-1/4"w x 2-1/16"h x 7-1/8"D. Made from 100% oxygen-free copper for a pure uninterrupted transfer of power. 2 ohms: 600 watts x 1 chan. This xd-pcs4-1b power amp kit includes 19-feet of 4 awg frosted blue power cable, 3-feet of 4 AWG black ground cable, 20-feet of 18 AWG blue remote turn-on wire, Maxi Fuse holder, 80 Amp Maxi fuse and more.

5-channel car amplifer. Dimensions: 7.


Similar products

---

JL Audio RBC1 Remote Bass Control

Low-profile design for custom installations. 75 watts rms x 4 + 180 watts RMS x 1 at 4 ohms. Selectable low-pass filter slope: 12 db or 24 db | variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline not supplied. Designed specifically for car audio systems up to 800 watts. 3 ohms: 500 watts x 1 chan.

Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. When the rbc-1 is connected, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the only active boost controller. Terminals and connections are Nickel-plated for excellent power transfer. Remotely controls Bass EQ of JL Audio amplifiers.

Premium power and ground wire provides optimal power transfer. The jl audio rbc-1 wired remote bass controller is designed to remotely control the Bass EQ boost or Input Level feature of JL Audio amplifier equipped with a "Remote Bass" or "Remote Level" port. 2 ohms: 600 watts x 1 chan. Rms power rating @14.

4v: 4 ohms: 400 watts x 1 chan. Overrides on-board boost control. 4 gauge power Amplifier Installation Kit.


Similar products

---

JL Audio Monoblock 1200W Subwoofer Speaker Amplifier - HD1200/1

10-1/4"w x 2-1/16"h x 7-1/8"D. Overrides on-board boost control. Fully variable frequency selection from 50-500Hz with detented, calibrated potentiometer. Remote level control with optional controller. 2 ohms: 600 watts x 1 chan. Dimensions: 1074 in w x 8. 29 in d x 1. 5 in H. Made from 100% oxygen-free copper for a pure uninterrupted transfer of power.

Dimensions: 7. 09"w x 8. 52"l x 2. 05"h. Max power output: 1200 watts x 1 chan. 2 ohms: 1200 watts x 1 chan. Power specifications - subwoofer channel rms power @ 4 ohms 1200 watts x 1 channel RMS Power @ 2 ohms 1200 watts x 1 channel RMS Power @ 1 ohm 1200 watts x 1 channel at 1. 5 ohms peak power output 1200 watts x 1 channel amplifier specifications amplifier class d number of Channels 1 - Mono Total Peak Power Output 1200 watts Total RMS Power Output 1200 watts Maximum Input Gauge Size 2 AWG Minimum Impedance Unbridged 1.

5 ohms minimum impedance bridged n/a thd at rated rms power 1% speaker level inputs no preamp outputs 1 pair built-in crossover low-pass lp high-pass hp high-pass crossover frequency 50 - 500 hz low-pass crossover Frequency 50 - 500 Hz Subsonic Filter 30 Hz Signal-to-Noise Ratio 110 dB Channel Separation N/A Bass Boost N/A Bass/Gain Remote Optional Accessory required and sold separately JL Audio HD-RLC Fan Cooled No Fuse Rating N/A CEA-2006 Compliant Yes Rms power rating @14.

4v: 4 ohms: 400 watts x 1 chan. Remotely controls Bass EQ of JL Audio amplifiers.


Similar products

---

JL Audio Monoblock 750 Watt HD Amplifier - HD750/1

Remotely controls Bass EQ of JL Audio amplifiers. Terminals and connections are Nickel-plated for excellent power transfer. Premium power and ground wire provides optimal power transfer. Removable power and speaker plugs. Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. Dimensions: 10-3/4"w x 2"H x 7-7/8"D. 5-channel car amplifer.

75 watts rms x 4 + 180 watts RMS x 1 at 4 ohms. 2 ohms: 600 watts x 1 chan. 750 watts rms x 1 1. 5 - 4 ohms per channel. Designed specifically for car audio systems up to 800 watts. Dimensions: 7. 09"w x 8. 52"l x 2. 05"h. 3 ohms: 400 watts x 1 chan. Tightly regulated, intelligent power supply maintains full power at any impedance from 1.

5-4 ohms and at any supply voltage from 11v-14. 5v. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash.


Similar products

---

JL Audio XD-CLRAIC2-18 2-Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors, 18-Feet

Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. Pure oxygen free copper conductors with Polyethylene Dielectrics. 4 gauge power Amplifier Installation Kit. Designed specifically for car audio systems up to 800 watts. Terminals and connections are Nickel-plated for excellent power transfer. Molded connector bodies for extended durability.

Dimensions: 7. 09"w x 8. 52"l x 2. 05"h. 5. 49 m 2-channel twisted-pair audio Interconnect Cable w/ Molded Connectors Rms power rating @14. 4v: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 5-channel car amplifer. Fully variable frequency selection from 50-500Hz with detented, calibrated potentiometer. Remote level control with optional controller.

75 watts rms x 4 + 180 watts RMS x 1 at 4 ohms. Twisted construction for increased quality. Premium power and ground wire provides optimal power transfer. 18 ft.


Similar products

---

JL Audio XD-CLRAIC4-18 4-Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors, 18-Feet

Rms power rating @12. 5v: 4 ohms: 300 watts x 1 chan. 2-channel twisted-Pair Audio Interconnect Cable. Fully variable frequency selection from 50-500Hz with detented, calibrated potentiometer. Remote level control with optional controller. 750 watts rms x 1 1. 5 - 4 ohms per channel. Molded connector bodies for extended durability.

Terminals and connections are Nickel-plated for excellent power transfer. Length: 18 ft 5. 49 m. 200 watts rms x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms. Tightly regulated, intelligent power supply maintains full power at any impedance from 1. 5-4 ohms and at any supply voltage from 11v-14. 5v. 75 watts rms x 4 + 180 watts RMS x 1 at 4 ohms.

Twisted construction for increased quality. Designed specifically for car audio systems up to 800 watts. 4-channel twisted-Pair Audio Interconnect Cable. Twisted construction for increased quality.


Similar products