IDEAL 33-864 Tone Generator and Amplifier Probe Kit

#ad
Identity Music Group 33-864 #ad - Use the ideal tone generator to apply a tone signal to a wire pair or single conductor, and trace with the amplifier probe. It allows for pin point identification even in the most congested cable bundles. Cable tracing kit with advanced new features to give a complete signal tracing solution. Our unit can be used with any tone generator.

It can be used on twisted pair, coax, and de-energized AC wiring. Kit includes: tone generator #62-160 amplifier Probe #62-164 Soft Black Nylon Carrying Case Cable Assemblies and Flat Tip. When used with the amplifier probe, the tone generator allows technicians to identify a wire within a bundle, at a cross connect or at a remote end.

IDEAL 33-864 Tone Generator and Amplifier Probe Kit #ad - Designed to identify and trace wires or cables within a group without damaging the insulation. Cable tracing kit with advanced new features to give a complete signal tracing solution. Volume control for increased sensitivity and adjustable to suit work environment. Recessed on/OFF button prevents battery drain.

Kit includes: tone generator no. 62-160 amplifier Probe No. 62-164 soft black nylon carrying Case Cable Assemblies and Flat Tip. The amplifier probe is designed to identify and trace wires or cables within a group without damaging the insulation.

More information about Identity Music Group 33-864 #ad

Linkmaster UTP/stp Cable Tester

#ad
Ideal 62-200 #ad - Tests wiring Configurations On Utp & Stp. Easily check for shorts, miss wires, reversals & split pairs. The tester will test all installed twisted pair wirings, unshielded & shielded modular plugs. Designed to test Installed Twisted Pair Wiring. Checks for shorts, Miswires, Reversals & Split Pairs. Tests unshielded & Shielded Modular Plugs.

. Main unit & remote Allow 1-person Testing. The tester incorporates a debug feature, automatic shut-off & low battery LED indicator. Use the linkmaster ethernet tester to test wiring configuration on UTP & STP.

More information about Ideal 62-200 #ad


Similar products



Fluke Networks TS19 Telephone Test Set with Banana Jacks to Alligator Clips 19800003

#ad
Fluke Networks 19800003 #ad - Fluke ts19 device tester 19800003 885. Last number redial. Polarity indication in talk mode. Tests wiring Configurations On Utp & Stp. Checks for shorts, Miswires, Reversals & Split Pairs. Detects dial tone and polarity, places and receives calls during testing of telephone lines. Tone dtmf and pulse operation. Tests unshielded & Shielded Modular Plugs.

Designed to test Installed Twisted Pair Wiring. High impedance DataSafe operation in monitor mode. Main unit & remote Allow 1-person Testing.

More information about Fluke Networks 19800003 #ad


Similar products



Klein Tools VDV226-011-SEN Ratcheting Modular Crimper/Stripper/Cutter

#ad
Klein - Geneva Supply VDV226-011-SEN #ad - Dimensions: 4-Inch x 7. 5-inch x 09-inch. Designed to test Installed Twisted Pair Wiring. Tests wiring Configurations On Utp & Stp. Tone dtmf and pulse operation. Detects dial tone and polarity, places and receives calls during testing of telephone lines. It helps provide fast, reliable modular-crimp connector installation for voice- and data applications.

The klein vdv226-011-sen ratcheting modular Crimper/Stripper is durably made from steel and finished in black oxide for high performance. Other features include: cuts, strips and crimps paired-conductor cables round stp/utp and flat-satin phone cables; Crimps 4-, 6- and 8-position modular connectors RJ22, RJ11/RJ12 and RJ45; Designed for Western Electric WE/Stewart Stamping SS-type modular connectors.

Klein Tools VDV226-011-SEN Ratcheting Modular Crimper/Stripper/Cutter #ad - Main unit & remote Allow 1-person Testing. Tests unshielded & Shielded Modular Plugs. Fast, reliable modular-crimp connector installation for voice and data applications. All-in-one tool, cuts, strips and crimps paired-conductor cables round STP/UTP and flat-satin phone cable. Crimps 4, and 8 position modular connectors RJ22, rj11/rj12, 6, and RJ45.

Crimping dies are precision ground from high-carbon steel. Ratchet safety-release and a blade-guard on cutting and stripping knives reduce risk of injury. Polarity indication in talk mode.

More information about Klein - Geneva Supply VDV226-011-SEN #ad


Similar products



Jonard M-216C/EX Hex Outer Socket Can Wrench with Ergonomic 1" Diameter Handle, 7" Length

#ad
Jonard Industries M-216C/EX #ad - Fast, reliable modular-crimp connector installation for voice and data applications. All-in-one tool, cuts, strips and crimps paired-conductor cables round STP/UTP and flat-satin phone cable. Crimps 4, 6, and 8 position modular connectors RJ22, rj11/rj12, and RJ45. Crimping dies are precision ground from high-carbon steel.

Ratchet safety-release and a blade-guard on cutting and stripping knives reduce risk of injury. Detects dial tone and polarity, places and receives calls during testing of telephone lines. Main unit & remote Allow 1-person Testing. Can wrench with ergonomic 1" diameter handle and hex outer socket. High impedance DataSafe operation in monitor mode.

Jonard M-216C/EX Hex Outer Socket Can Wrench with Ergonomic 1" Diameter Handle, 7" Length #ad - The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets. Last number redial. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

Designed to test Installed Twisted Pair Wiring. Used in placing fuses in cable terminals and connecting wires to fuses and binding posts.

More information about Jonard Industries M-216C/EX #ad


Similar products



Fluke Networks 11293000 Pro-Tool Kit IS60 with Punch Down Tool

#ad
Fluke Networks 11293000 #ad - Detects dial tone and polarity, places and receives calls during testing of telephone lines. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

Designed to test Installed Twisted Pair Wiring. Fast, reliable modular-crimp connector installation for voice and data applications. All-in-one tool, cuts, strips and crimps paired-conductor cables round STP/UTP and flat-satin phone cable. Crimps 4, rj11/rj12, and 8 position modular connectors RJ22, 6, and RJ45.

Crimping dies are precision ground from high-carbon steel. Ratchet safety-release and a blade-guard on cutting and stripping knives reduce risk of injury. High impedance DataSafe operation in monitor mode. The fluke networks 11293000 is60 Pro-Tool Kit is covered by a limited warranty. The pouch even holds tools securely upside down.

Fluke Networks 11293000 Pro-Tool Kit IS60 with Punch Down Tool #ad - Easy-to-use cable stripper quickly rings and slits many types of cable. This six piece set includes the following: d914s impact tool for solid terminations, and an EverSharp 66/110 cut blade, a cable stripper to quickly ring and slit many types of cable, a Mini flashlight, electrician’s D-Snips, conveniently held in a PVC Dur-a-Grip pouch.

More information about Fluke Networks 11293000 #ad


Similar products



Ideal 158050 VDV II RJ-45 Remotes 1-12 Accessory Pack

#ad
Ideal 158050 #ad - Kit includes ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt. Separate numbered remotes. Cut and strip wire more cleanly and quickly with the Electricians' D-SnipsTM. Tests unshielded & Shielded Modular Plugs. Checks for shorts, Miswires, Reversals & Split Pairs. Main unit & remote Allow 1-person Testing.

Tests wiring Configurations On Utp & Stp. Designed to test Installed Twisted Pair Wiring. Easy-to-use cable stripper quickly rings and slits many types of cable. Allows for multiple cables to be tested more quickly. Detects dial tone and polarity, places and receives calls during testing of telephone lines. Tone dtmf and pulse operation.

Ideal 158050 VDV II RJ-45 Remotes 1-12 Accessory Pack #ad - Last number redial. Separate numbered remotes allow multiple cables to be tested more quickly. Polarity indication in talk mode. Fast, reliable modular-crimp connector installation for voice and data applications. All-in-one tool, cuts, strips and crimps paired-conductor cables round STP/UTP and flat-satin phone cable.

Crimps 4, 6, and 8 position modular connectors RJ22, rj11/rj12, and RJ45.

More information about Ideal 158050 #ad


Similar products



Jonard TWAF-71620 Full Head Torque Wrench, 7/16" Drive, 20 inch/lbs Torque, 6-1/2" Length

#ad
Jonard Industries TWAF-71620 #ad - Main unit & remote Allow 1-person Testing. Allows for multiple cables to be tested more quickly. The wrench is 6-1/2" long. Jonard industries manufactures hand tools for telecom, fiber optics, and electronic industries. Available in full head or speed head types for traditional or ratcheting-type use. Last number redial.

Kit of 12 x rJ45 remote units. Tests wiring Configurations On Utp & Stp. D914s industry standard punch down tool makes for solid terminations, reduces hand fatigue and includes a built-in hook & spudger. The torque wrench is available with a full head or speed head. Cut and strip wire more cleanly and quickly with the Electricians' D-SnipsTM.

Jonard TWAF-71620 Full Head Torque Wrench, 7/16" Drive, 20 inch/lbs Torque, 6-1/2" Length #ad - Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

The company, founded in 1958 and headquartered in Tuckahoe, NY, complies with Restriction of Hazardous Substances RoHS directives. Polarity indication in talk mode. Torque wrench for tightening F-type connectors used in datacom and telecom industries.

More information about Jonard Industries TWAF-71620 #ad


Similar products



TRENDnet 8P/RJ-45 and 6P/RJ-12, RJ-11 Crimp, Cut, and Strip Tool, TC-CT68

#ad
TRENDnet TC-CT68 #ad - Detects dial tone and polarity, places and receives calls during testing of telephone lines. Checks for shorts, Miswires, Reversals & Split Pairs. Easy-to-use cable stripper quickly rings and slits many types of cable. Tone dtmf and pulse operation. For any ethernet or Telephone Cable. Designed to test Installed Twisted Pair Wiring.

Rofessional tool crimps, strips and cuts cable for 8 and 6 position modular plugs. 1-year limited warranty. Torque wrench for tightening F-type connectors used in datacom and telecom industries. Last number redial. This user friendly device works with any Ethernet or telephone cable. It has a ratchet mechanism to keep tool closed when not in use.

TRENDnet 8P/RJ-45 and 6P/RJ-12, RJ-11 Crimp, Cut, and Strip Tool, TC-CT68 #ad - Kit includes ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt. Applies specified amount of torque 20 or 30 inch pounds to prevent over-tightening. Cut and strip wire more cleanly and quickly with the Electricians' D-SnipsTM. The crimp tool offers reliable, easy-to-use, and affordable solution to meet immediate cutting needs.

. Kit of 12 x rJ45 remote units.

More information about TRENDnet TC-CT68 #ad


Similar products



TRENDnet 5-Port Gigabit PoE+ Switch, 31 W PoE Budget, 10 Gbps Switching Capacity, Plug & Play, Full & Half Duplex, TPE-TG50g

#ad
TRENDnet TPE-TG50G #ad - D914s industry standard punch down tool makes for solid terminations, reduces hand fatigue and includes a built-in hook & spudger. Available in full head or speed head types for traditional or ratcheting-type use. Embedded green net technology reduces power consumption by up to 70%. Main unit & remote Allow 1-person Testing.

Compact design with easy handle hand grips. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

TRENDnet 5-Port Gigabit PoE+ Switch, 31 W PoE Budget, 10 Gbps Switching Capacity, Plug & Play, Full & Half Duplex, TPE-TG50g #ad - Poe+ - supplies up to 30 watts of PoE power per port with a 31Watts PoE budget. High impedance DataSafe operation in monitor mode. Ports - 4 x gigabit PoE+ ports and 1 x Gigabit port. Fast, reliable modular-crimp connector installation for voice and data applications. All-in-one tool, cuts, strips and crimps paired-conductor cables round STP/UTP and flat-satin phone cable.

Crimps 4, 6, rj11/rj12, and 8 position modular connectors RJ22, and RJ45. Crimping dies are precision ground from high-carbon steel. Ratchet safety-release and a blade-guard on cutting and stripping knives reduce risk of injury.

More information about TRENDnet TPE-TG50G #ad


Similar products



Findway RG59 RG6 RG11 Cable F-Connector Compression Tool / Blue and Black Plastic and Steel Adjustable Compression Tool-Hardened Steel Construction With Black Oxide Finished

#ad
Findway CECOMINOD055931 #ad - For any ethernet or Telephone Cable. Main unit & remote Allow 1-person Testing. Rofessional tool crimps, strips and cuts cable for 8 and 6 position modular plugs. Supplies up to 30 watts of PoE power per port with a 31 watt PoE budget. All steel Construction for Durability. Kit includes ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt.

Last number redial. D914s industry standard punch down tool makes for solid terminations, reduces hand fatigue and includes a built-in hook & spudger. For use on rg59 rg6 rg11 cable F-Connector. Tone dtmf and pulse operation. Checks for shorts, Miswires, Reversals & Split Pairs. Separate numbered remotes. Allows for multiple cables to be tested more quickly.

Findway RG59 RG6 RG11 Cable F-Connector Compression Tool / Blue and Black Plastic and Steel Adjustable Compression Tool-Hardened Steel Construction With Black Oxide Finished #ad - Led indicators convey port status. Polarity indication in talk mode. Applies specified amount of torque 20 or 30 inch pounds to prevent over-tightening. 10 gbps switching capacity. Available in full head or speed head types for traditional or ratcheting-type use. Embedded green net technology reduces power consumption by up to 70%.

More information about Findway CECOMINOD055931 #ad


Similar products