AudioDia

Dimensions: 10-3/4"w x 2"H x 7-7/8"D. Hd750/1 - jl audio 1 channel 750 Watt HD Amplifier. Removable power and speaker plugs. Subsonic filter and output polarity control. 750 watts rms x 1 1. 5 - 4 ohms per channel.

---

JL Audio HD-RLC Amplifier Remote Level Control and Cable

5. 5 m cable. The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M500/3, M700/5, M400/4, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. The hd-rlc remote level controller works with jl audio's HD Series and XD Series amplifiers and many marine amps, allowing you to manage your level settings from the front of your vehicle. The hd-rlc adjusts your amplifier's level, not its "bass boost, " so you maintain the same bass quality as you turn the volume up and down.

.


Similar products

---

JL Audio HD600/4 Class D 600 Watt 4 Channel Full Dash Range Car Amplifier

5. 5 m cable. Description: class D Four-Channel Full-Range Amplifier. Differential-Balanced Input Topology: 2 pairs of inputs. Rb jl audio hd600/4 amp 4 channel 600 w hd component speakers tweeters amplifier the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M500/3, M200/2, M700/5, M600/6.

When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. On-board crossover: state-variable, 12 db/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels.

Min copper power / ground Wire Gauge: 4 AWG wire. Patented technology: Single Cycle Control.


Similar products

---

Kicker CK4 Complete 4 Gauge OFC CK-Series 2-Channel Amplifier Installation Kit

On-board crossover: state-variable, 12 db/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels. Designed specifically for car audio systems up to 1000 watts. Includes 2-channel rcA interconnect cables for the audio signal connection from the receiver to the amplifier.

Made from 100% oxygen-free copper for a pure uninterrupted transfer of power. Min copper power / ground Wire Gauge: 4 AWG wire. Differential-Balanced Input Topology: 2 pairs of inputs. This kicker 4 gauge power amplifier wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts.

The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. Patented technology: Single Cycle Control. Complete 4 gauge ofc ck-Series 2-Channel Amplifier Installation Kit. Premium power and ground wire provides optimal power transfer. 5. 5 m cable.

Description: class D Four-Channel Full-Range Amplifier. The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M500/3, M700/5, M400/4, M200/2, M600/6.


Similar products

---

Dynamat 10007 Dyna-Roller Professional Heavy Duty Sound Deadener Installation Tool with Wood Handle and 2" Wide Rubber Roller

Professional tool for applying Dynamat and ensuring proper adhesion with professional-looking results. Premium power and ground wire provides optimal power transfer. Designed specifically for car audio systems up to 1000 watts. Patented technology: Single Cycle Control. Min copper power / ground Wire Gauge: 4 AWG wire.

On-board crossover: state-variable, 12 db/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels. Made from 100% oxygen-free copper for a pure uninterrupted transfer of power. Includes 2-channel rcA interconnect cables for the audio signal connection from the receiver to the amplifier.

The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M700/5, M500/3, M400/4, M200/2, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. 5. 5 m cable. Description: class D Four-Channel Full-Range Amplifier. Differential-Balanced Input Topology: 2 pairs of inputs.


Similar products

---

JL Audio XD400/4v2 4-channel car amplifier — 75 watts RMS x 4

Includes 2-channel rcA interconnect cables for the audio signal connection from the receiver to the amplifier. Jl audio xd400/4v2 400 watt rms 4-channel car amplifier the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M700/5, M400/4, M500/3, M600/6.

When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. 8-9/16"w x 2-1/16"h x 7-1/8"D.

Premium power and ground wire provides optimal power transfer. Made from 100% oxygen-free copper for a pure uninterrupted transfer of power. 4-channel car amplifier. Differential-Balanced Input Topology: 2 pairs of inputs. 200 watts rms x 2 bridged at 4 ohms 4-ohm stable bridged. Complete 4 gauge ofc ck-Series 2-Channel Amplifier Installation Kit.

Min copper power / ground Wire Gauge: 4 AWG wire. Designed specifically for car audio systems up to 1000 watts.


Similar products

---

Dynamat 13100 1-1/2" Wide and 30' Long DynaTape Sound Deadener

Dynamat 13100 One roll 1. 5 wide x 30 long 38mm x 9. 1m. 002 thick solid Aluminum Finishing Tape. Premium power and ground wire provides optimal power transfer. Designed for use along the Seams of Dynamat to Contain the Butyl Core. Aluminum Backed Finishing Tape. Min copper power / ground Wire Gauge: 4 AWG wire. Aluminum layer is Printed with the Dynamat Logo.

8-9/16"w x 2-1/16"h x 7-1/8"D. 1-year Warranty. On-board crossover: state-variable, 12 db/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels. Dt dynrlr prof. 75 watts rms x 4 at 4 ohms 100 watts RMS x 4 at 2 ohms. Gives a finished and Professional Appearance. Includes 2-channel rcA interconnect cables for the audio signal connection from the receiver to the amplifier.

Designed specifically for car audio systems up to 1000 watts. 5. 5 m cable. Description: class D Four-Channel Full-Range Amplifier. 200 watts rms x 2 bridged at 4 ohms 4-ohm stable bridged.


Similar products

---

JL Audio JX400/4D 4-channel car amplifier — 70 watts RMS x 4

Bridged, 4 ohms: 200 watts x 2 chan. Rms power rating 12. 5v: 4 ohms: 50 watts x 4 chan. 3-way protection circuitry thermal, overload, and speaker short protection. Jl audio jx400/4d 4-channel 400w rms component speakers tweeters amplifier new the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M700/5, M200/2, M500/3, M600/6.

When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Aluminum Backed Finishing Tape.

Premium power and ground wire provides optimal power transfer. 200 watts rms x 2 bridged at 4 ohms 4-ohm stable bridged. Rms power rating 14. 4v: 4 ohms: 70 watts x 4 chan. Dt dynrlr prof. Fuse rating: 40a x 1 inline not supplied | Dimensions: 7. 68"w x 9. 05"l x 2.


Similar products

---

Dynamat 10455 18" x 32" x 0.067" Thick Self-Adhesive Sound Deadener with Xtreme Bulk Pack, Set of 9

2 ohms: 80 watts x 4 chan. Nine 18" x 32" sheets high tack permanent adhesive. Unlike dynamat original, dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations. Increased flexibility. Class d amplifier design with NextDTM switching amp technology. Min copper power / ground Wire Gauge: 4 AWG wire.

High-performance dynamat xtreme is lighter than Dynamat Original, requires no heat to apply and is recommended for vehicle tops, four times more effective, sides and contoured areas. Includes 2-channel rcA interconnect cables for the audio signal connection from the receiver to the amplifier. New - Retail.

Designed specifically for car audio systems up to 1000 watts. 5. 5 m cable. Description: class D Four-Channel Full-Range Amplifier. Bridged, 4 ohms: 160 watts x 2 chan. Input sensitivity: low level input: 200mV - 4V | High level input: 2. 0mv - 100v. Dt dynrlr prof.


Similar products

---

CLS110RG-W7AE - JL Audio 10" Single 10W7AE Loaded Subwoofer Enclosure

New - Retail. Includes 2-channel rcA interconnect cables for the audio signal connection from the receiver to the amplifier. 3-way protection circuitry thermal, overload, and speaker short protection. Aluminum Backed Finishing Tape. Made from 100% oxygen-free copper for a pure uninterrupted transfer of power.

Increased flexibility. Dt dynrlr prof. Patented technology: Single Cycle Control. Power handling: peak: 1500 watts /RMS: 750 watts. Nine 18" x 32" sheets high tack permanent adhesive. Designed specifically for car audio systems up to 1000 watts. 8-9/16"w x 2-1/16"h x 7-1/8"D. 75 watts rms x 4 at 4 ohms 100 watts RMS x 4 at 2 ohms.

10" single 3 ohm W7 Series Subwoofer. 2 ohms: 80 watts x 4 chan. Premium power and ground wire provides optimal power transfer. 1-year Warranty. Aluminum-coated for heat-resistance. Cls110rg-w7ae jl audio 10" single 10w7ae loaded subwoofer enclosure the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M700/5, M400/4, M200/2, M500/3, M600/6.




Similar products

---

Kicker PKD1 Dual 1/0 Gauge Power Amplifier Installation Kit

Increased flexibility. Patented technology: Single Cycle Control. 2 ohms: 80 watts x 4 chan. High grade black carpet finish. Class d amplifier design with NextDTM switching amp technology. Min copper power / ground Wire Gauge: 4 AWG wire. Designed specifically for car audio systems up to 1000 watts. 10" single 3 ohm W7 Series Subwoofer.

Aluminum-coated for heat-resistance. Made from 100% oxygen-free copper for a pure uninterrupted transfer of power. Rms power rating 14. 4v: 4 ohms: 70 watts x 4 chan. Aluminum Backed Finishing Tape. The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M400/4, M500/3, M700/5, M600/6.

When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Premium power and ground wire provides optimal power transfer.

Made from 100% oxygen-free copper for a pure uninterrupted transfer of power. 1-year Warranty.


Similar products