AudioDia

Designed according to ergonomic. Settled three-point fillet can reduce the pressure of long-time wear to the head. High softness, more comfortable, ventilate and environmental sponge fit the contours of the face, less ambient light. Standard 1600mah 7. 4v 2s lipo battery, with power display function, supports USB 5V charging, long life.

Any questions, please feel free to contact us via email: amazon@eachine. Com. Package included: 1 x Eachine VR-007 video glasses 1 x 7. 4v 1600mah battery 1 x manual Small size, light weight. Description: brand: eachine Dimensionmm: 148x176x102 Screen size: 4. 3 inch screen resolution: 480x272 working temperature: -20℃-80℃ Ultra-lightweight design: 256gbattery included Battery weight: 24g Power voltage: 1600mah 7.

4v standard configuration2s smart lipo battery, with power display function, supports USB 5V charging Antenna: 5. 8g 3db power dissipation: 500mA Frequency channel: built-in 40CH 5. 8ghz a/v automatic search receiver Language choice: multilinguals can be choosed in osd menuEnglish, French, Italian and so on.

.

---

Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug

Precision manufactured and 100% tested. Runs on 5. 8 ghz commonly used for FPV. Plug type: rp-sma Plug for both receiver and transmitter. Package list: 1x 3-blades antenna for TX 1x 4-blades antenna for RX Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional.

Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. Circularly polarized for reduced interference. Clover-leaf style antenna / Omni-directional. Greatly increases video and audio signal.


Similar products

---

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna： exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature:：25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type：FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ. Channel carrier error: 1db antenna port: 50 Ωsensor:pal: 720x540/ntsc:640x480 1/4"lens anGEL: H:120°/V:100°Base-band interface: P1. 27*2profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mmpackage including1 * fpv Micro AIO Camera1 * Micro JST 1. 25 to 2 pin wafer Cable 1. 5cm y splitter1 * random color camera mount Anbee® circularly Polarized for Reduced Interference.

Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional.


Similar products

---

Crazepony Eachine EF-01 FPV Micro AIO Camera 40CH Transmitter Combo for FPV Indoor Drone like Blade Inductrix etc

2 senconds is switch A, 2, B, without light is PAL.1 sec or less: change channels 1-8Long press More than 1. 5 sec: change bands a-b-e-f-rlong + press more than 3 sec: change ntsc/pal systemntsc or pal selectable; blue led on= ntsc; blue led off=PAL Body:Weight: 8gSize: 26x20x18mm without antennaPackage Including1 * EF-01 AIO FPV Camera1 * Cable 1 * Micro JST 1.

25mm connector cable1 * User manual Anbee® circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. Fpv micro aio camera 5.

8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.


Similar products

---

Floureon 2 Packs 3S 11.1V 1500mAh 35C RC Lipo Battery with XT60 Plug for RC Car, Skylark m4-fpv250, Mini Shredder 200, Qav250, Vortex, Drone and FPV 2.91 x 1.46 x 1.08 Inch

All in one 5. 8g 40ch 25mw vtx 800tvl cmos camera with FPV RHCP circular polarization clover leaf antenna. 5senconds is switch NTSCPAL, 3, 4. Package including :1 * ef-01 aio fpv camera, 1 * blade inductrix ultra micro jst y Splitter, 1 * Cable, 1 * Micro JST 1.25mm connector Cable, 1 * User manual. For the control button: 1 sencond is switch 1, blue light is ntsc, C.

To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using. Please notice: ❶for the rc battery, only if the voltage and the plug match, then it will fit. All floureon products sold by SEVESTO are comply with RoHS, CE standard.

Application】rc airplane, vortex and emax nighthawk 250 only if the voltage, dimension and the plug match, FPV, truck, boat, mini Shredder 200, Indy250 plus mojo 280, Qav250, Skylark m4-fpv250, helicopter, drone, car, then it will fit. Miniature and light weight design. Lens mirror diameter is 2. 1mm ir blocked fov150 horizontal, 150 ° FOV horizontal viewing angle of 170 ° DFOV diagonal.

Only if the voltage, dimension and the plug match, then it will fit. Please stop charging immediately when the cell voltage been charged to 4.


Similar products

---

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 48CH 25mW FPV transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

5senconds is switch NTSCPAL, 3, 4. Description : the aio camera combo is perfect for ultra micro drone. It is a combination of a FPV camera,  a transmitter and an antenna. It includes everything into a single unit no bigger than one dollar coin. It's compatible with branded FPV googles and monitors equipped with 5.

8ghz receivers. Installation is easy and can be done in seconds. No soldering or special skills are required. All you need is to put it into your drone and power it by a 1S Lipo battery. Needed to complete with 1S Li-Po Battery and 5. 8ghz fpv headset or Monitor. Miniature and light weight design.

All in one vtx + camera + antenna, plug and play, ready to fly. Specification: Frequency：5. 8ghz 6 bands 48 channels, with raceband: 5658-5917MHz Output power：25mW Input voltage： 3. 3v-5. 5v current consumption： 280matyp camera resolution： 600tvl field of view： 120° Video Format：NTSC Antenna: Dipole Brass Antenna Size: 15X 12.

5mmlx w weight: 3.


Similar products

---

RioRand RC Hobby C23212 LiPo Voltage Checker + Warning Buzzer

2 senconds is switch A, B, 2, without light is PAL. What you get】floureon 2 packs 3s 11. 1v 1500mah 35c with xt60 plug lipo battery with 1 year warranty and friendly customer service. Voltage note】please check whether the battery surface is alright when you get it and whether the voltage is between 3. 7~4.

2v before using. Specification】material: li-polymer; battery voltage: 11. 1v; cell: 3s; Cell voltage: 3. 7~4. 2v; capacity: 1500mah; discharge: 35C; Discharge plug: XT60 connector. Dimension】2. 91x1. 46x1. 08inch; net weight: 028lb. Lipo voltage Checker with Warning Buzzer. Lens mirror diameter is 2. 1mm ir blocked fov150 horizontal, 150 ° FOV horizontal viewing angle of 170 ° DFOV diagonal.

Easy installation for racing drone, Only 3. 4g. Preferred by knowledgeable Model Hobbists & R/C Enthusiasts.


Similar products

---

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

5senconds is switch NTSCPAL, 3, 4. Preferred by knowledgeable Model Hobbists & R/C Enthusiasts. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1.

8 lense on these cameras. All stock hardware is used, press them into the mount, and 2 side Flight Controller Screws, super simple installation. Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2. 2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv camera MountWhite1 * FPV Camera MountOrange Anbee® circularly Polarized for Reduced Interference.

Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma plug for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. Fpv micro aio camera 5.


Similar products

---

AKK A1 Mini 5.8Ghz 40CH 25mW FPV Transmitter Raceband 600TVL FPV Micro AIO Camera with Clover Antenna for FPV Camera System

Lipo voltage Checker with Warning Buzzer. All in one vtx + camera + antenna, plug and play, ready to fly. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation. Feature: Compatible with 5. 8ghz googles and monitor. It's just one more way AKK technology lets you have more fun with fewer hassles.

All floureon products sold by SEVESTO are comply with RoHS, CE standard. Application】rc airplane, mini shredder 200, truck, dimension and the plug match, boat, vortex and emax nighthawk 250 only if the voltage, drone, Qav250, car, Indy250 plus mojo 280, Skylark m4-fpv250, FPV, helicopter, then it will fit.

Power by 1S lipo battery. Miniature and light weight design. Five bands 40 channels with Raceband, Micro size:26x20x18mm, light weight:6. 8g.


Similar products

---

Crazepony FX797T FPV Camera Blade Inductrix Tiny Whoop 600TVL 5.8g 25mW 40CH Tx Raceband with Clover Antenna for Indoor FPV Racing

Top-quality Materials & Superb Craftsmanship. Lipo voltage Checker with Warning Buzzer. Easy installation for racing drone, Only 3. 4g. Preferred by knowledgeable Model Hobbists & R/C Enthusiasts. Miniature and light weight design. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. 4-leaf antenna for better signal transmission, easy to install.

5. 8ghz 5 bands 40 channels, with raceband，micro size：17 * 17. 5 * 12. 5mm，light weight：3. 4g. This is a camera/VTX mount for the Blade Inductrix. Weighs in at 2~3g. Button control instead of switches to change channels. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation. All in one 5.


Similar products

---

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Button control instead of switches to change channels. 2 senconds is switch A, 2, B, without light is PAL. What you get】floureon 2 packs 3s 11. 1v 1500mah 35c with xt60 plug lipo battery with 1 year warranty and friendly customer service. Voltage note】please check whether the battery surface is alright when you get it and whether the voltage is between 3.

7~4. 2v before using. Specification】material: li-polymer; battery voltage: 11. 1v; cell: 3s; Cell voltage: 3. 7~4. 2v; capacity: 1500mah; discharge: 35C; Discharge plug: XT60 connector. Dimension】2. 91x1. 46x1. 08inch; net weight: 028lb. Easy installation for racing drone, Only 3. 4g. Lipo voltage Checker with Warning Buzzer.

All floureon products sold by SEVESTO are comply with RoHS, CE standard. Application】rc airplane, skylark m4-fpv250, car, drone, helicopter, truck, qav250, vortex and emax nighthawk 250 only if the voltage, mini Shredder 200, boat, FPV, dimension and the plug match, Indy250 plus mojo 280, then it will fit.




Similar products