Denso 234-9009 Oxygen Sensor

Stainless steel housing Resists Corrosion and Contamination with a Rugged, Watertight Body. This sensor can easily be installed and ensures longevity. Denso oxygen sensor is designed to detect the amount of the exhaust gas air and fuel ratio. Denso oxygen sensors feature an aluminum-Oxide Trap Layer to Protect the Ceramic from Silicone and Lead Poisoning, Preventing Damage to the Platinum Electrod.

This sensor features zirconia solid electrolyte integrated with alumina heater substrate which precicely controls the amount of oxygen concentration that flows into the diffusion layer to limit current flow. Double protection cover maintains Proper Unit Temperature for Quicker Response Times and Protects the Ceramic Element From Contamination.

. Air/fuel ratio sensors utilize a sophisticated Sensing Element that Enables Them to Produce a Precise Output in Proportion to the Air/Fuel Ratio. Porous ptfe filter allows atmospheric Oxygen the Enter the Sensor without Permitting Water or Engine Contaminants to Seep into the Casing. It is constructed from durable material that is corrosion and abrasion resistant.

Afr sensors provide the ecu with an exact afR Response, Lower Emissions, Resulting in Better Performance, and Increased Gas Mileage.

Denso 234-9007 Air Fuel Ratio Sensor

Highly accurate. Constructed from durable material. Manufactured to detect the amount of exhaust gas air fuel ratio. This sensor features zirconia solid electrolyte integrated with alumina heater substrate which precicely controls the amount of oxygen concentration that flows into the diffusion layer to limit current flow.

Features zirconia solid electrolyte. Denso air and fuel ratio sensor is designed to detect the amount of the exhaust gas air and fuel ratio. It is constructed from durable material that is corrosion and abrasion resistant. This sensor can easily be installed and ensures longevity. Easy installation.


Similar products

Denso 234-9009 Oxygen Sensor
Denso 234-4137 Oxygen Sensor
Powerbuilt 648691 Oxygen Sensor Offset Puller
TEKTON 4929 3/8-Inch Drive by 7/8-Inch Oxygen Sensor Socket
Denso 234-4623 Oxygen Sensor
Dorman 917-211 Variable Valve Timing Solenoid
Denso 234-4622 Oxygen Sensor
NGK (8916) TE58 Wire Set
FRAM CA7351 Extra Guard Round Plastisol Air Filter
GENUINE TOYOTA/LEXUS Knock Sensor Harness 82219-07010


Denso 234-4215 Oxygen Sensor

Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing. Highly accurate. Designed to detect the amount of oxygen in the exhaust system. It is constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics.

Easy installation. Manufactured to detect the amount of exhaust gas air fuel ratio. Constructed from durable material. Denso oxygen sensor is designed to detect the amount of oxygen in the exhaust stream. Constructed from high quality material. Easy installation. Manufactured with precision to meet OE standards. Features zirconia solid electrolyte.

It is manufactured with precision to meet OE standards. This oxygen sensor can be installed easily and ensures longevity. This sensor features double protection layer, aluminum oxide trap layer, porous PTFE filter and stainless steel housing.


Similar products

Denso 234-9009 Oxygen Sensor
Denso 197-6020 Mass Air Flow Sensor
Powerbuilt 648691 Oxygen Sensor Offset Puller
Bosch 15217 Oxygen Sensor, OE Type Fitment
Dorman 917-211 Variable Valve Timing Solenoid
Denso 673-1301 Ignition Coil
Dorman 917-214 Variable Valve Timing Solenoid
Denso (3297) SK20R11 Iridium Spark Plug, Pack of 1
AntennaX Power Antenna Replacement Mast for Lexus RX300
TYC 800009P Toyota/Lexus Replacement Cabin Air Filter


Powerbuilt 648691 Oxygen Sensor Offset Puller

Manufactured to detect the amount of exhaust gas air fuel ratio. Features zirconia solid electrolyte. Constructed from durable material. Manufactured with precision to meet OE standards. Slotted design allows removing oxygen sensor with wiring harness attached. Tool solutions for most all situations. Powerbuilt offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots.

Slotted design allows removing oxygen sensor with wiring harness attached. Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Precision casting for strength and accurate fit. Designed to detect the amount of oxygen in the exhaust system. Precision casting for strength and accurate fit.

Highly accurate. Easy installation. Easy installation. 7/8 inch 22 millimeter hex fits almost all oxygen sensors. Made to be the most reliable tools in the market today. Constructed from high quality material.


Similar products

Permatex 81343 Anti-Seize Lubricant, 1 oz. Tube
Denso 234-4169 Oxygen Sensor
Bosch 13477 Oxygen Sensor, OE Type Fitment
TEKTON 4929 3/8-Inch Drive by 7/8-Inch Oxygen Sensor Socket
Denso 234-4797 Oxygen Sensor
Bosch 15717 Oxygen Sensor, OE Type Fitment
Lisle 12230 Oxygen Sensor Thread Chaser
Denso 234-9123 Oxygen Sensor (Air and Fuel Ratio Sensor)
Bosch 13474 Oxygen Sensor, OE Type Fitment
Motorcraft DY835 Oxygen Sensor


Dorman 917-211 Variable Valve Timing Solenoid

Dorman's engine variable Timing Solenoid is durably engineered for years of effective performance. Easy installation. Constructed from durable material. Manufactured to detect the amount of exhaust gas air fuel ratio. Oe#: 15340-0a010 . Highly accurate. Built to exceed tool standards. Designed to detect the amount of oxygen in the exhaust system.

Direct replacement for a proper fit every time. Made to be the most reliable tools in the market today. 7/8 inch 22 millimeter hex fits almost all oxygen sensors. Slotted design allows removing oxygen sensor with wiring harness attached. Precision casting for strength and accurate fit. Features zirconia solid electrolyte.

Easy installation. Constructed from high quality material. Replacement restores fuel efficiency and returns your vehicle to normal operation. Manufactured with precision to meet OE standards. Resistant against wear and tear. Tool solutions for most all situations.


Similar products

Dorman 917-214 Variable Valve Timing Solenoid
Denso 673-1301 Ignition Coil
Denso 234-9021 Oxygen Sensor
Denso 234-9009 Oxygen Sensor
Set of 6 Ignition Coil for Avalon Camry ES300 RX300 Lexus Sienna fits UF267
ECCPP Ignition coil for Lexus Toyota Avalon Camry Compatible with C1175 UF267 IC108(Pack of 6)
GENUINE TOYOTA/LEXUS Knock Sensor Harness 82219-07010
FRAM CA7351 Extra Guard Round Plastisol Air Filter
DORMAN 917-032 Knock Sensor Harness
Beck Arnley 039-6428 PCV Valve Grommet


Dorman 917-214 Variable Valve Timing Solenoid

Constructed from high quality material. Features zirconia solid electrolyte. Slotted design allows removing oxygen sensor with wiring harness attached. Replacement restores fuel efficiency and returns your vehicle to normal operation. Direct replacement for a proper fit every time. Easily plugs into the electrical harness.

Highly accurate. Direct replacement for a proper fit every time. Precision casting for strength and accurate fit. Oe#: 15340-0a010 Resistant against wear and tear. 7/8 inch 22 millimeter hex fits almost all oxygen sensors. Designed to detect the amount of oxygen in the exhaust system. Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing.

Manufactured to detect the amount of exhaust gas air fuel ratio. Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Resistant against wear and tear. Easy installation. Constructed from durable material. 3/8 inch square drive for use with ratchet.


Similar products

Dorman 917-211 Variable Valve Timing Solenoid
Denso 673-1301 Ignition Coil
Denso 234-9021 Oxygen Sensor
Denso 234-9009 Oxygen Sensor
GENUINE TOYOTA/LEXUS Knock Sensor Harness 82219-07010
Set of 6 Ignition Coil for Avalon Camry ES300 RX300 Lexus Sienna fits UF267
ECCPP Ignition coil for Lexus Toyota Avalon Camry Compatible with C1175 UF267 IC108(Pack of 6)
Genuine Toyota (16261-20010) Water Bypass Hose
Beck Arnley 039-6428 PCV Valve Grommet
Ishino Intake Plenum Gasket


Denso 197-6020 Mass Air Flow Sensor

Constructed from durable material. Easy installation. Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Sensing element air bypass structure is designed for improved detection accuracy. Built to exceed tool standards. Denso mass air flow sensor 197-6020 Manufactured to detect the amount of exhaust gas air fuel ratio.

Direct replacement for a proper fit every time. Oe#: 15330-0a010 Oe#: 15340-0a010 Easily plugs into the electrical harness. Constructed from high quality material. Designed to detect the amount of oxygen in the exhaust system. Precision casting for strength and accurate fit. Glass film coated sensing elements reduces contamination and improves reliability.

Easily plugs into the electrical harness. Features zirconia solid electrolyte. 7/8 inch 22 millimeter hex fits almost all oxygen sensors. Resistant against wear and tear. Resistant against wear and tear.


Similar products

Genuine Toyota 12204-62010 PCV Valve Sub-Assembly
Beck Arnley 039-6428 PCV Valve Grommet
Denso 234-9009 Oxygen Sensor
Denso 234-9002 Air Fuel Ratio Sensor
NGK (4412) TE66 Wire Set
Denso 234-9021 Oxygen Sensor
Denso 234-4261 Oxygen Sensor
Denso 234-9001 Air Fuel Ratio Sensor
Denso 234-4215 Oxygen Sensor
Denso 673-1201 Ignition Coil


Denso 673-1301 Ignition Coil

Highly accurate. Direct replacement for a proper fit every time. Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing. Manufactured with precision to meet OE standards.

Tool solutions for most all situations. Direct replacement for a proper fit every time. Easy installation. Denso oe identical Ignition Coil. Easily plugs into the electrical harness. Platinum wire sensing element responds quickly to changes in air flow. Sensing element air bypass structure is designed for improved detection accuracy.

Constructed from durable material. Oe#: 15330-0a0107/8 inch 22 millimeter hex fits almost all oxygen sensors. Built to exceed tool standards. Easy installation. Precision casting for strength and accurate fit. Mass air Flow Sensors.


Similar products

Denso (3297) SK20R11 Iridium Spark Plug, Pack of 1
Dorman 917-214 Variable Valve Timing Solenoid
Dorman 917-211 Variable Valve Timing Solenoid
Denso 234-9009 Oxygen Sensor
GENUINE TOYOTA/LEXUS Knock Sensor Harness 82219-07010
Denso (5304) IK20 Iridium Power Spark Plug, (Pack of 1)
Denso (4504) PK20TT Platinum TT Spark Plug, (Pack of 1)
Ishino Intake Plenum Gasket
Denso 197-6020 Mass Air Flow Sensor
GearWrench 80546 5/8-Inch x 6-Inch Swivel Spark Plug Socket


Permatex 81343 Anti-Seize Lubricant, 1 oz. Tube

3/8 inch square drive for use with ratchet. Glass film coated sensing elements reduces contamination and improves reliability. Sensing element air bypass structure is designed for improved detection accuracy. Resistant against wear and tear. Direct replacement for a proper fit every time. Slotted design allows removing oxygen sensor with wiring harness attached.

Salt, corrosion and moisture resistant, this lubricant is ideal for marine use. Features zirconia solid electrolyte. Oe#: 15340-0a010 Manufactured to detect the amount of exhaust gas air fuel ratio. Prevents galling, corrosion and seizing and to assure easier disassembly. 7/8 inch 22 millimeter hex fits almost all oxygen sensors.

Direct replacement for a proper fit every time. Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Constructed from durable material. Platinum wire sensing element responds quickly to changes in air flow. Manufactured with precision to meet OE standards. Easily plugs into the electrical harness.




Similar products

GearWrench 80546 5/8-Inch x 6-Inch Swivel Spark Plug Socket
Permatex 22058 Dielectric Tune-Up Grease, 3 oz. Tube
Lisle 67870 Spark Plug Gauge Gap
Permatex 81150 Dielectric Tune-Up Grease, 0.33 oz. Tube
3/8-Inch Drive by 5/8-Inch Magnetic Swivel Spark Plug Socket | ARES 70045 | 10-Inch Swivel Extension Permits Access to Most Confined Areas
Powerbuilt 648691 Oxygen Sensor Offset Puller
Denso (4504) PK20TT Platinum TT Spark Plug, (Pack of 1)
NGK # 6994 LASER IRIDIUM Premium Spark Plugs IZFR6K-11---- 4 PCS * NEW *
NGK 6619 Iridium Spark Plugs LFR6AIX-11 - 6 PCS *NEW*
Motorcraft SP534 Spark Plug


AntennaX Power Antenna Replacement Mast for Lexus RX300

Mass flow sensors helps in delivering optimum combustion and emissions. Installation is very simple and can be done without removing the power antenna motor from your vehicle Detailed step-by-step installation instructions are included and written in simple english and include diagrams, photographs, and troubleshooting.

3/8 inch square drive for use with ratchet. Sample image May Vary From Actual Product. Suggested applications: For easy removal of spark plugs, cylinder head and exhaust head bolts. Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots. Tool solutions for most all situations.

Temperature range: -60F to 1600F. Constructed from durable material. Easy installation. Mass air Flow Sensors. Direct replacement for a proper fit every time. If you can hear your power antenna motor running, clicking, or grinding when you turn on and off your radio, then all you need to do is replace your power antenna mast.

If you do not hear your Power Antenna Motor running, then you will need to replace the whole unit. Prevents galling, corrosion and seizing and to assure easier disassembly.


Similar products

TYC 800009P Toyota/Lexus Replacement Cabin Air Filter
6102 Lexus RX300 1999-2003 Liftgate Lift Supports Strut, Set of 2
Depo 312-1412R-AS Lexus RX 300 Passenger Side Replacement Front Side Marker Lamp Assembly
Discount Keyless Replacement Keyless Entry Remote Fob Uncut Blank Key Blade Shell Case For HYQ1512V, HYQ12BBT
StrongArm 6102 Lexus RX300, Liftgate Lift Support, Pack of 1
2 Pieces (SET) Tuff Support Liftgate Lift Supports 1999 To 2003 Lexus Rx300
Bosch 5079WS / F00E164747 Workshop Engine Air Filter
TYC 18-5987-00 Lexus RX300 Replacement Rear Passenger Side Marker
Lexus RX300 Chrome Without Hid Headlights Headlamps Driver/Passenger Pair New
LEXUS A/C HEATER AIR MIX SERVO 87106-48020


Denso 234-4137 Oxygen Sensor

Constructed from high quality material. Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing. Resistant against wear and tear. 7/8 inch 22 millimeter hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet. Highly accurate. Suggested applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.

Easily plugs into the electrical harness. Salt, corrosion and moisture resistant, this lubricant is ideal for marine use. Glass film coated sensing elements reduces contamination and improves reliability. Denso oe identical Ignition Coil. It is constructed from high quality stainless steel, aluminum oxide, fluorine rubber, porous polytetrafluoroethylene, high-grade platinum and ceramics.

Sensing element air bypass structure is designed for improved detection accuracy. Oe#: 15340-0a010 Easy installation. Prevents galling, corrosion and seizing and to assure easier disassembly. Made to be the most reliable tools in the market today. Manufactured with precision to meet OE standards.


Similar products

Denso 234-9010 Air Fuel Ratio Sensor
Denso 234-4622 Oxygen Sensor
Denso 234-4626 Oxygen Sensor
Denso 234-9021 Oxygen Sensor
Walker 31374 Exhaust Gasket
Powerbuilt 648691 Oxygen Sensor Offset Puller
Walker 31332 Exhaust Gasket
Denso 234-9007 Air Fuel Ratio Sensor
Walker Exhaust Resonator-DF Assy (48319)
NGK (8916) TE58 Wire Set