AudioDia

Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Work for blade inductrix, Tiny Whoop, Nano QX etc. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc. Package including2 * cW motor2 * CCW motor Bonus rubber rings. Special sauce edition 17500kv @3. 7v / 65, 000 rpm.

---

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

Tiny whoop quadcopter frame blade inductrix eachine e010 with 4pcs propellers reddescription:frame wheelbase: 67mmmaterial: pvcpropeller color: redquantity: 1pc quadcopter frame and 4pcs 4-leaf propellersUsage: for Tiny Whoop, Blade Inductrix or Eachine E010--------------------Package Including1 * RC Quadcopter E010 Frame Black 4 * 4-leaf Propellers Red1 * Battery Foam Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Little modification, more applications for Blade Inductrix. Frame wheelbase: 67mm, Frame weight: 5g.


Similar products

---

Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV

Package included: 1 x rakonheli CNC 3K Pure Carbon Fiber Stiffener. Suitable for eachine e010 JJRC H36 or Tiny Whoop. Idtx483-cf. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Frame wheelbase: 67mm, Frame weight: 5g. 1. Rakon. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Description:- support Frame Stiffening and Simple installation without any glue or fastening.

Material: 3K Pure Carbon Fiber. Weight: 059g = 002oz. Use for stock or cnc kit 6mm Motor - Blade Inductrix/FPV. 2. Little modification, more applications for Blade Inductrix.


Similar products

---

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Frame wheelbase: 67mm, Frame weight: 5g. Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12.

5 mmweight: 3. 6gantenna： exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature:：25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type：FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ.


Similar products

---

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix JST-PH 2. 0 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 57mm * 12. 5mm * 6. 2mmweight: 6. 7g/per unitcapacity: 230mah in standardvoltage, 250mAh in high voltageThe connector plug: JST-PH2. 0 aka high current ultra micro, mcpxthis battery is lighter than the usual 230mah battery, Powerwhoop, and can be charged to either standard voltage 4.

2v, 230mah or high voltage 4. 35v, 250ish mah. This is newly developed chemistry for a longer lifetime and safer charging situation. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Little modification, more applications for Blade Inductrix. Idtx483-cf. Capacity: standard voltage 4.

2v, 230mahor High voltage 4. 35v, 250ish mah. Frame wheelbase: 67mm, Frame weight: 5g. Tiny whoop Blade inductrix future choice of battery. This battery will give you higher rpms more power and a considerably longer flight time.


Similar products

---

Blade Main Frame: Inductrix

Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Idtx483-cf. Rakon. Blade main frame: inductrix, blh8706 suitable for eachine e010 JJRC H36 or Tiny Whoop. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

Frame wheelbase: 67mm, Frame weight: 5g. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Tiny whoop Blade inductrix future choice of battery. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3.

6g, small size with 47 * 14. 8 * 12. 5 mm.


Similar products

---

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Miniature and light weight design. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Suitable for battery of blade inductrix, nano CP X, Nano QX 3D, mCP X, Glimpse, Nano QX etc.

Input charge connector: Male 4mm Banana Plug. Little modification, more applications for Blade Inductrix. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix.

Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle.




Similar products

---

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix. Only fit for fx798t fx797T MC-01 camera. Weighs in at 2~3g. Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 Main frame: Inductrix. Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2.

2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv camera mountWhite1 * FPV Camera MountOrange Suitable for eachine e010 JJRC H36 or Tiny Whoop. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Just remove the front, press them into the mount, and 2 side Flight Controller Screws, and reassemble.




Similar products

---

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector

Main frame: Inductrix. Rakon. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. The connector plug: micro jst 1. 25 aka molex1. 25, pico, mCX. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix Micro JST 1. 25 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 54mm * 12.

5mm * 6. 0mmweight: 6. 3g/per unitcapacity: 230mah in standardvoltage, 250mAh in high voltageThe connector plug: Micro jst 1. 25 aka molex1. 25, pico, mcxthis battery is lighter than the usual 230mah battery, and can be charged to either standard voltage 4.2v, 230mah or high voltage 4. 35v, 250ish mah. This is newly developed chemistry for a longer lifetime and safer charging situation.

Miniature and light weight design. Tiny whoop Blade inductrix future choice of battery. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah.


Similar products

---

Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery

Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Little modification, more applications for Blade Inductrix. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Charge 6 batteries at the same time, keep your tiny whoop staying in the air.

Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Upgraded 35c discharge built to fit perfectly in your Blade Inductrix, Tiny Whoop. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Dimension: 54mm * 12. 5mm * 6.


Similar products

---

5pcs-Tattu LiPo Battery Pack 220mAh 3.7V 45C 1S with Ultra Micro for Blade Inductrix Tiny Whoop FPV Nano QX Nano CPX Nano CPS in the E-flite Micro Planes

3. All rights Reserved by Gensace&Tattu. 2. For any questions, pls feel free to contact us through "Your Orders" tab of your Amazon account, we will respond within one business day. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Upgraded 35c discharge built to fit perfectly in your Blade Inductrix, Tiny Whoop.

Frame wheelbase: 67mm, Frame weight: 5g. Just charge and fly. Tattu professional lipo Battery; Superior Japan and Korea Lithium Polymer raw materials. Tiny whoop Blade inductrix future choice of battery. Dimension: 50mm * 11mm * 5. 5mm. Features: 1. Superior japan and Korea Lithium Polymer raw materials. Output connector: 6x micro jst 1.

25; 6x jst-ph 2. 0 Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras.


Similar products