Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

Crazepony - Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount Works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Just remove the front, and reassemble. Solder your power wires to the Battery input pads and your ready to fly.

Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2. 2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv camera MountWhite1 * FPV Camera MountOrange This is a camera/VTX mount for the Blade Inductrix. Weighs in at 2~3g. 3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix.

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera - Only fit for fx798t fx797T MC-01 camera. Weighs in at 2~3g. Just remove the front, press them into the mount, and 2 side Flight Controller Screws, and reassemble. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount works well with the 1.

More information about Crazepony

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

Crazepony - Frame wheelbase: 67mm, Frame weight: 5g. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Little modification, more applications for Blade Inductrix. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Tiny whoop quadcopter frame blade inductrix eachine e010 with 4pcs propellers reddescription:frame wheelbase: 67mmmaterial: pvcpropeller color: redquantity: 1pc quadcopter frame and 4pcs 4-leaf propellersUsage: for Tiny Whoop, Blade Inductrix or Eachine E010--------------------Package Including1 * RC Quadcopter E010 Frame Black 4 * 4-leaf Propellers Red1 * Battery Foam Suitable for eachine e010 JJRC H36 or Tiny Whoop.

More information about Crazepony


Similar products



Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Crazepony - Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna: exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature::25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type:FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ. Channel carrier error: 1db antenna port: 50 Ωsensor:pal: 720x540/ntsc:640x480 1/4"lens anGEL: H:120°/V:100°Base-band interface: P1. 27*2profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mmpackage including1 * fpv Micro AIO Camera1 * Micro JST 1. 25 to 2 pin wafer Cable 1. 5cm y splitter1 * random color camera mount Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc - Including 1pc quadcopter frame and 4pcs 4-leaf propellers.

More information about Crazepony


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

Crazepony - Frame wheelbase: 67mm, Frame weight: 5g. Bonus rubber rings. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 0

8mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1. 25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc. Package including2 * cw motor2 * ccw motor Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings - Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12.

More information about Crazepony


Similar products



Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

Crazepony - Little modification, more applications for Blade Inductrix. Crazepony 4pcs tiny Whoop FPV Dipole Whip Antenna 5. 8g 35mm omnidirectional weld connector for FX798T FPV Micro AIO CameraDescription:Electrical Characteristics : 5. 8g receiveran omnidirectional high sensitivity antenna built-in the transmitter gain antenna.

Frequency: 4900-5900mhzSWR:≤2. 0retrun loss:﹥-10DBAntenna Gain: 1. 5±03dbipolarization : linearimpedance :50 OhmMaterial of Radiator : CuMarerial of PlasticCable type: OD 1. 13mmoperation temperature : -10℃ to +180℃storage temperature : -10℃ to +180℃Connector: WELDWire : RF113balckLength : 35mmPackage Including4 * 5.

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera - 8g fx798t fpv brass antenna suitable for eachine e010 JJRC H36 or Tiny Whoop. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Swr:≤2. 0 Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Work for blade inductrix, Tiny Whoop, Nano QX etc. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera.

More information about Crazepony


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

Crazepony - Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzv. Bonus rubber rings. Motor diameter: 6mm, motor Length: 15mm, Cable Length: 56mm. Speed: insane, 19000kv / 70000 rpm. Little modification, more applications for Blade Inductrix.

With 1. 25mm jst plug, perfect for Inductrix FC. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Frame wheelbase: 67mm, Frame weight: 5g. Miniature and light weight design. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: 1.

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings - 8g eachno load speed: 70000±15% rpmrated load speed: 40500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1. 25mm jst plugquantity: 4 pcs 2 cw and 2 ccwwork for blade inductrix, tiny whoop, nano QX etcBonus rubber ringsPackage Including2 * CW motor2 * CCW motor Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Impedance :50 Ohm. Insane for blade inductrix, Tiny Whoop, Nano QX etc.

More information about Crazepony


Similar products



Crazepony FX798SC Micro FPV Camera Tiny Whoop 5.8G 25mW 40CH Transmitter with Exclusive Dipole Whip Antenna for Blade Inductrix etc

Crazepony - Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Speed: insane, 19000kv / 70000 rpm. With 1. 25mm jst plug, perfect for Inductrix FC. Impedance :50 Ohm. The fx798sc has a dipole whip antenna whereas FX797T and FX798T have cloverleaf. Polarization : Linear. Bonus rubber rings. Work for blade inductrix, Tiny Whoop, Nano QX etc.

5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Frame wheelbase: 67mm, Frame weight: 5g. Miniature and light weight design. Including 1pc quadcopter frame and 4pcs 4-leaf propellers.

Crazepony FX798SC Micro FPV Camera Tiny Whoop 5.8G 25mW 40CH Transmitter with Exclusive Dipole Whip Antenna for Blade Inductrix etc - Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Here is the excellent video: https://www. Youtube. Com/watch?v=ptc_YQJ5Vsk feature=youtu. Be.

More information about Crazepony


Similar products



Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV

Rakon - Suitable for eachine e010 JJRC H36 or Tiny Whoop. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Micro size:17 * 17. 5 * 12. 5mm, light weight:4. 5g. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Antenna Gain: 1.

Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV - 5±03dbi. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW.

More information about Rakon


Similar products



Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Crazepony - With 1. 25mm jst plug, perfect for Inductrix FC. Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Board size: 62. 5x32x5mm, weight: 17g06ounces. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. The fx798sc has a dipole whip antenna whereas FX797T and FX798T have cloverleaf.

Polarization : Linear. Micro size:17 * 17. 5 * 12. 5mm, light weight:4. 5g. This is camera works on a 2. 5v - 5v range which means it can run off the Inductrix's 3. 7v single cell battery. Swr:≤2. 0 Antenna Gain: 1. 5±03dbi. Retrun loss:﹥-10db. Special sauce edition 17500kv @3.

More information about Crazepony


Similar products



Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

Crazepony - Micro size:17 * 17. 5 * 12. 5mm, light weight:4. 5g. Speed: insane, 19000kv / 70000 rpm. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. The fx798sc has a dipole whip antenna whereas FX797T and FX798T have cloverleaf. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Insane for blade inductrix, Tiny Whoop, Nano QX etc.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector - Idtx483-cf. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix JST-PH 2.

More information about Crazepony


Similar products



Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop

Crazepony - Speed: insane, 19000kv / 70000 rpm. Description:Dimension:35*22. 2*7. 5mmweight: about 027g/pccolor: random red, yellow, black, bluepackage Including6 * Foam Insertrandom color Suitable for eachine e010 JJRC H36 or Tiny Whoop. Little modification, more applications for Blade Inductrix. Tiny whoop Blade inductrix future choice of battery.

Color: random red, black, yellow, blue. Suitable for battery of blade inductrix, Nano QX 3D, Nano CP X, Glimpse, mCP X, Nano QX etc. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Dimension:35*22. 2*7. 5mm. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1.

Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop - 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.

More information about Crazepony


Similar products