AudioDia

Heat activated adhesive built into the sleeve of the heat shrink tubing. Heatshrink ring 22-18 #8 25/pk sold per pack 8 screw, 22-18 awg, 25 pack of Heat Shrink Ring Terminals. Ul listed and CSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

.

---

Ancor 309025 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Butt Connectors 22 to 18-Gauge, 25-Pack

Marine gradetm heat shrink butt connectors feature tinned copper for maximum current flow and corrosion resistance. Ul listed and CSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Wire range: 22-18 quantity: 25 25 pack of 22-18 awg heat Shrink Butt Connectors. Adhesive line heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief.


Similar products

---

Ancor 100810 Marine Grade Electrical Primary Tinned Copper Boat Wiring 18-Gauge, Red, 100-Feet

Exceeds all ul 1426, us coast Guard Charter Boat and ABYC standards. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Gauge 18 color red length 100' 25 pack of 22-18 awg heat Shrink Butt Connectors. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, oil, battery acid, gasoline, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Heat activated adhesive built into the sleeve of the heat shrink tubing. Marine grade primary wire is tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105 degrees C, the heavy duty insulation is resistant to heat an abrasion.

Ul listed and CSA recognized. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.

.


Similar products

---

Ancor 252253 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 4-Gauge, Size 10 Screw, 2-Pack

Closed end to seal out moisture. Seamless barrel design allows for maximum strength when crimped. Ul 486a. Closed end design seals out moisture so cables stay dry and corrosion free. Marine grade lugs are heavy duty, pure copper for maximum current flow and tinned for corrosion resistance and easy soldering. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Tinned for corrosion resistance, Pure copper for maximum current flow. Wire size- 4 screw size- 10 qty- 2 25 pack of 22-18 awg heat Shrink Butt Connectors. Heat activated adhesive built into the sleeve of the heat shrink tubing. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture.

They are constructed with premium vinyl insulation that is rated at 600 volts, heat, 105 deg C dry and 75 deg C wet, gasoline, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, abrasion and ultra-violet radiation.2 pack of 4 awg heavy-duty Lugs with a #10 Screw Size Ring.

Ul listed and CSA recognized. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.


Similar products

---

Ancor 211408 Marine Grade Electrical Nylon Insulated Double Crimp Funnel Entry Fully Insulated Disconnects with Insulation Grip Female, 22 to 18-Gauge, 25-Pack

Heat activated adhesive built into the sleeve of the heat shrink tubing. Ul 310 Nylon insulators are easy to crimp and will not split. Ul 486a. Marine grade fully insulated nylon disconnects with insulation grip. 250 tab size. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Seamless barrel design allows for maximum strength when crimped. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture.

Barrels are designed to tightly grip the wire with the least effort. They are constructed with premium vinyl insulation that is rated at 600 volts, battery acid, gasoline, 105 deg C dry and 75 deg C wet, heat, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

2 pack of 4 awg heavy-duty Lugs with a #10 Screw Size Ring. 25 pack of 22-18 awg, Female fully insulated nylon disconnects. Closed end design seals out moisture so cables stay dry and corrosion free. Wire range 22-18 gender female qty 100 25 pack of 22-18 awg heat Shrink Butt Connectors.


Similar products

---

Ancor Marine Grade Duplex Cables

Tinned copper gives the least electrical resistance but the most corrosion protection. 25 pack of 22-18 awg heat Shrink Butt Connectors. They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, battery acid, oil, 105 deg C dry and 75 deg C wet, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

2 pack of 4 awg heavy-duty Lugs with a #10 Screw Size Ring. Seamless barrel design allows for maximum strength when crimped. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Closed end design seals out moisture so cables stay dry and corrosion free. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.


Similar products

---

Ancor 304148 Marine Grade Electrical Adhesive Lined Heat Shrink Tubing 3/8-Inch Diameter, 48-Inches Long, Black

Seamless barrel design allows for maximum strength when crimped. 25 pack of 22-18 awg heat Shrink Butt Connectors. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Nylon insulators are easy to crimp and will not split.

Insulates and protects connections from mechanical abuse; wire pullout and abrasion. The premium vinyl insulation is rated at 600 volts, battery acid, 105 deg C dry and 75 deg C wet, oil, gasoline, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Package of 1 black 48 in 122 cm long sections with a 3/8 in 9. 5 mm diameter that shrinks to 1/8 in 3. 2 mm. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment.

Closed end design seals out moisture so cables stay dry and corrosion free. Ul 310 Operating temperature range of -40 deg C to 110 deg C.


Similar products

---

Ratcheting Single Crimp

The ratcheting operation with ergonomic handle to will prevent hand fatigue. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.

Cross linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.

Nylon insulators are easy to crimp and will not split. 4 color-coded cavities for different wire sizes. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Tinned copper gives the least electrical resistance but the most corrosion protection. Must be fully closed before tool allows itself to open ensuring a proper crimp.

Closed end design seals out moisture so cables stay dry and corrosion free. Heat activated adhesive built into the sleeve of the heat shrink tubing.


Similar products

---

Blue Sea Systems 10 Gang Common 150A Busbar with Cover

Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Ul listed and CSA recognized. Operating temperature range of -40 deg C to 110 deg C.

Cross linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Ul 224. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture. The premium vinyl insulation is rated at 600 volts, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, 105 deg C dry and 75 deg C wet, gasoline, battery acid, abrasion and ultra-violet radiation.

Package of 1 black 48 in 122 cm long sections with a 3/8 in 9. 5 mm diameter that shrinks to 1/8 in 3. 2 mm. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Seamless barrel design allows for maximum strength when crimped. Heat activated adhesive built into the sleeve of the heat shrink tubing.


Similar products

---

Blue Sea Systems 5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

Includes lever to release jaws mid-cycle in the event of an incorrectly placed terminal. Tinned copper gives the least electrical resistance but the most corrosion protection. Ul 310 Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture.

4 color-coded cavities for different wire sizes. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.

Ul listed and CSA recognized. Single crimp. Fuses not included. Must be fully closed before tool allows itself to open ensuring a proper crimp. Seamless barrel design allows for maximum strength when crimped. Closed end design seals out moisture so cables stay dry and corrosion free. Heat activated adhesive lining provides impervious seal to salt water, acids, oil, and sunlight as well as providing strain relief.

Highest shrink ratio - shrinks to 1/3 original size.


Similar products

---

Ancor Marine Grade Products 12-10 AWG Heat Shrink Male Disconnects 3 Pack

25 pack of 22-18 awg, Female fully insulated nylon disconnects. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards.

Ul listed and CSA recognized. 2 mounting holes accept #10 M5 screws. Ratcheting operation with ergonomic handle to prevent hand fatigue. Can be used for 24-hour circuits. Includes lever to release jaws mid-cycle in the event of an incorrectly placed terminal. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. St blade fuse block - 6 circuits with negative bus and cover.

Ancor's marine grade terminals differ from automotive terminals by being designed for the harsh marine environment. Shrinks to form a water tight seal and the ultimate vibration and strain relief.


Similar products