AudioDia

This aio camera can be installed in minutes and ready to fly. Installs in seconds. Feature: Compatible with 5. 8ghz googles and monitor. It's just one more way AKK technology lets you have more fun with fewer hassles. All in one vtx + camera + antenna, plug and play, ready to fly. 40 channel with raceband, good quality image with zero latency, Button control instead of switches to change channels.

Integrated booster circuit prevents motor and servo interference. Specification:output power: 25mW Input power: 3. 2-5v current consumption:3. 2v-5v, 200ma camera resolution: 600tvl video system:ntsc mini illumination: 1 lux Field of view: 120°viewing angle Antenna dimensions: 22mm X 29mm diameter Antenna: 4 lobe right hand circular polarized Frequency: 5.

8ghz 5 bands 40 channels Size: 18. 7*13mml*wpackage includes: 1x a1 aio fpv camera1x cable1x ManualThe 4-leaf antenna is an upgraded version of the 3-leaf antennas Super light weight:4. 5g, small size: 18. 7*13mml*W. 4-leaf antenna for better signal transmission, easy to install. Integrated booster circuit prevents motor interference, Signal Range Suitable for Ultra Micro RC Aircraft.

Its signal range is ideal for park flyers or racing quads.

---

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount Works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation.

Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2. 2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv camera MountWhite1 * FPV Camera MountOrange This is a camera/VTX mount for the Blade Inductrix.

Weighs in at 2~3g. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. 3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix.

Only fit for fx798t fx797T MC-01 camera. Weighs in at 2~3g.


Similar products

---

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 48CH 25mW FPV transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

Easy installation for racing drone, Only 3. 4g. Button control instead of switches to change channels. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Just remove the front, press them into the mount, and 2 side Flight Controller Screws, and reassemble. Power by 1S lipo battery. Specification: Frequency：5.

8ghz 6 bands 48 channels, with raceband: 5658-5917MHz Output power：25mW Input voltage： 3. 3v-5. 5v current consumption： 280matyp camera resolution： 600tvl field of view： 120° Video Format：NTSC Antenna: Dipole Brass Antenna Size: 15X 12. 5mmlx w weight: 3. 4g package included: 1 x wt05 aio fpv camera with cable 1 X User Manual 1 X Cable This is a camera/VTX mount for the Blade Inductrix.

Weighs in at 2~3g. All in one vtx + camera + antenna, plug and play, ready to fly. Description : the aio camera combo is perfect for ultra micro drone. It is a combination of a FPV camera,  a transmitter and an antenna. It includes everything into a single unit no bigger than one dollar coin.

It's compatible with branded FPV googles and monitors equipped with 5.


Similar products

---

Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter

Specification: power supply: DC 12V Working Frequency: 5. 8ghz sensitivity: ≤-90 dbm type standard: ntsc/pal consumption current: 200ma, max receiver connector: RP SMA female Antenna connector: RP SMA male Available Channel: 40CH Antenna Gain: 2dbi Audio Carrier: 6. 5mhz audio output Level: 1. 0 vp-p typ 10 k ohm antenna impedance: 50 ohm antenna input impedance: 50 Ohm TYP Video impedance: 75 Ohm Video Format : NTSC/PAL Video Output Level: 1.

0 vp-p typ 75 ohm dimension: 80x65x15mm Weight: 85g Dimension L×W×H: 3. 15×2. 56×059 inches package: 1 x WR832 5. 8ghz 40ch fpv receiver 1 x antenna 1 x power cable 1 x av cable 1 x User manual Notice: Please get a 12V lipo battery for the receiver. Power off memory: Replay the very last frequency band and channel.

Easy installation for racing drone, Only 3. 4g. We do not suggest over-voltage battery or car battery. Button control instead of switches to change channels. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1.




Similar products

---

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

Two switching buttons: easy to change frequency channels and bands. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Power by 1S lipo battery. All in one vtx + camera + antenna, plug and play, ready to fly. Easy installation for racing drone, Only 3. 4g. Insane for blade inductrix, Tiny Whoop, Nano QX etc.

Power off memory: Replay the very last frequency band and channel. Button control instead of switches to change channels. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. 40 channels: 5 bands and all frequencies compatible, E, b, F, Cover A, r bands. Universal video transmitter and receiver for all, quadcopter, compatible with various kinds of remote control toys RC helicopter, airplane and boat etc.

Speed: insane, 19000kv / 70000 rpm. Long range more than 2km range in the open area - Plug and play. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras.


Similar products

---

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Polarization : Linear. Power off memory: Replay the very last frequency band and channel. All in one vtx + camera + antenna, plug and play, ready to fly. With 1. 25mm jst plug, perfect for Inductrix FC. Just remove the front, press them into the mount, and 2 side Flight Controller Screws, and reassemble.

Power by 1S lipo battery. Long range more than 2km range in the open area - Plug and play. Impedance :50 Ohm. Crazepony 4pcs tiny Whoop FPV Dipole Whip Antenna 5. 8g 35mm omnidirectional weld connector for FX798T FPV Micro AIO CameraDescription:Electrical Characteristics : 5. 8g receiveran omnidirectional high sensitivity antenna built-in the transmitter gain antenna.

Frequency: 4900-5900mhzSWR:≤2. 0retrun loss:﹥-10DBAntenna Gain: 1. 5±03dbipolarization : linearimpedance :50 OhmMaterial of Radiator : CuMarerial of PlasticCable type: OD 1. 13mmoperation temperature : -10℃ to +180℃storage temperature : -10℃ to +180℃Connector: WELDWire : RF113balckLength : 35mmPackage Including4 * 5.

8g fx798t fpv brass antenna this is a camera/VTX mount for the Blade Inductrix.


Similar products

---

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Antenna Gain: 1. 5±03dbi. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Power by 1S lipo battery. Retrun loss:﹥-10db. All in one vtx + camera + antenna, plug and play, ready to fly. Swr:≤2. 0 Miniature and light weight design. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1.

25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information.

Wide lens angle. Two switching buttons: easy to change frequency channels and bands. Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14.


Similar products

---

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

Long range more than 2km range in the open area - Plug and play. Power off memory: Replay the very last frequency band and channel. Polarization : Linear. Antenna Gain: 1. 5±03dbi. Retrun loss:﹥-10db. Insane for blade inductrix, Tiny Whoop, Nano QX etc. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna.

Frequency: 4900-5900mhzv. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Bonus rubber rings. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Impedance :50 Ohm. Just remove the front, press them into the mount, and 2 side Flight Controller Screws, and reassemble.

Power by 1S lipo battery. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Miniature and light weight design. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW.


Similar products

---

BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad

Bonus rubber rings. 40 channels: 5 bands and all frequencies compatible, F, Cover A, E, b, r bands. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc. Speed: insane, 19000kv / 70000 rpm. Long range more than 2km range in the open area - Plug and play.

Button control instead of switches to change channels. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Power by 1S lipo battery. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. Impedance :50 Ohm.

Special sauce edition 17500kv @3. 7v / 65, 000 rpm. With 1. 25mm jst plug, perfect for Inductrix FC. Polarization : Linear. Power off memory: Replay the very last frequency band and channel. 5.


Similar products

---

BTG Propellers Props for DIY Micro Indoor FPV RC Racing Quadcopter Racer Drone Miniquad Frame Support 8520 Motor Like Tiny QX90 QX95 LT105 JJPRO T1 T2 Kingkong Q100

Special sauce edition 17500kv @3. 7v / 65, 000 rpm. With 1. 25mm jst plug, perfect for Inductrix FC. Package including 6x sets propelers only. Retrun loss:﹥-10db. For 8520 motors, please refer to asin:b01m5j9mx2, and ASIN:B06XR2SPMR for Propeller Guards. Antenna Gain: 1. 5±03dbi. Polarization : Linear. Bonus rubber rings.

This is a camera/VTX mount for the Blade Inductrix. Weighs in at 2~3g. All in one vtx + camera + antenna, plug and play, ready to fly. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. For 8520 motors, please refer to asin:b01m5j9mx2, and ASIN:B06XR2SPMR for Propeller Guards. Long range more than 2km range in the open area - Plug and play.

These props is fit for Tiny Whoop airframe with 6x15mm motors. 5. 8ghz 5 bands 48 channels, with Raceband: 5658-5917MHz. These propellers can work for tiny qx90 qx95 lt105 jjpRO T1 T2 Kingkong Q100 frame kit and other miniquads support 8520 motor.


Similar products

---

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

Packing list: 24PCS propellers. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Propellers for diy micro FPV Racing Quadcopter Frame kit Color: orange, black. Antenna Gain: 1. 5±03dbi. With 1. 25mm jst plug, perfect for Inductrix FC. Only 0225g and lighter than the 4-blades props 03g. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera.

Impedance :50 Ohm. Compatible with hubsan H107C, H107D. Frame wheelbase: 67mm, Frame weight: 5g. Smaller inertia and more power violent. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Package including 6x sets propelers only. 40 channels: 5 bands and all frequencies compatible, Cover A, b, F, E, r bands.

Universal video transmitter and receiver for all, quadcopter, compatible with various kinds of remote control toys RC helicopter, airplane and boat etc. Speed: insane, 19000kv / 70000 rpm. Button control instead of switches to change channels.


Similar products