2-4 Gauge Driver Battery Quick Connect Plug Kit Recovery Winch Trailer 350 amps

#ad
AURELIO TECH CECOMINOD050476 #ad - The ends are designed to connect in only one direction, making it impossible to connect the wrong polarities to one another. Suited for high-current use with winches rated 8, 000 pounds or higher. The connectors are ideal for 12-36 volts DC low-voltage, and low or medium direct current use. A robust and efficient connect and disconnect connector kit for a winch, remote battery charger, trailer or other electrical devices.

The terminal pins inner diameter is 0258" and can accept wire from 2 to 4 gauge. Terminal pins diameter: 0258" / 6. 55mm; capacity: maximum 350 ampsPerforms Best at 175 amps. Package includes: a pair of connectors 2 connector ends, 4 terminal pins, and 2 rubber boot caps. It's made from polycarbonate, a versatile and tough plastic that offers great strength combined with light weight.

2-4 Gauge Driver Battery Quick Connect Plug Kit Recovery Winch Trailer 350 amps #ad - Usage and installation is very straightforward, simply insert the wires into the terminal pins, then fuse or crimp them. Connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". Fits 2-4 gauge wire; voltage: 12-36 volts DC. The bottom of the plug is lined with rubber to protect against dust, moisture and corrosion.

Permitting over 10, 000 connect and disconnect actions.

More information about AURELIO TECH CECOMINOD050476 #ad

CUR238 - Install Bay Copper Ring Terminal 2 Gauge 3/8 Inch 10 Pack

#ad
Metra Electronics Corp CUR238 #ad - 2 gauge 3/8 Inch. 10 pack. Copper ring terminal 2 gauge 3/8 Inch 10 Pack Copper Ring Terminal.

More information about Metra Electronics Corp CUR238 #ad


Similar products



ABN Jumper Cables with Carrying Bag, 25’ Feet, 2-Gauge, 600 AMP – Commercial Grade Automotive Booster Cables Any Vehicle

#ad
Auto Body Now 9012 #ad - The jumper cables come in a travel bag that prevents tangling and offers convenient storage and transport. With low-temperature resistance and all copper parrot clamps, these cables administer optimal contact so you can get the job done right. Copper Ring Terminal. 10 pack. The abn jumper cables with carrying bag, van, 600 amp - commercial grade automotive booster Cables for Any Vehicle is a safe way to transfer power whenever you need a quick boost on your truck, car, RV, or even bus, 25' Feet, tractor, 2-Gauge, SUV, or semi battery.

The heavy-duty 2-gauge cable is 25 feet long for optimal reach. Practical: be prepared with the abn jumper cables with carrying bag, 2-Gauge, 25' Feet, 600 AMP - Commercial Grade Automotive Booster Cables for Any Vehicle so you can safely boost jump your vehicle whenever need. Easy to use: color identification of cables prevents crossing of wires; Red + Black -; Tangle-free cables; For RVs, tractors, buses, semis.

ABN Jumper Cables with Carrying Bag, 25’ Feet, 2-Gauge, 600 AMP – Commercial Grade Automotive Booster Cables Any Vehicle #ad - Durable: heavy-duty 2-gauge cable constructed with solid copper clamps to administer optimal contact; Serrated jaws; High-tension parrot clamps; Non-slip rubber coating offers a secure connection grip; For use in all weather conditions. Forget about getting stuck with a dead battery. The handles are designed for safe, secure clamping, and the cables are color coded to prevent crossing wires.

. 2 gauge 3/8 Inch.

More information about Auto Body Now 9012 #ad


Similar products



Crimp Supply Ultra-Flexible Car Battery/Welding Cable - 2 Gauge, 25 Feet Red/25 Feet Black - and 5 Copper Lugs

#ad
Crimp Supply #ad - Rated to 600 volts. Rohs compliant and meets SAE J1127. Operating temperatures is -58°f to +221°F -50°C to +105°C. Storage bag: convenient carrying bag that prevents tangling and keeps your cables safe and organized; Cables fit inside any vehicle, so you can take them with you while traveling anywhere. Features a flared and chamfered barrel to ease application of finely stranded wire or welding cable.

2 gauge 3/8 Inch. Ships same business day. Made in the usa! also known as welding cable this very flexible battery cable can easily lace throughout an engine compartment and around tight turns with ease. Seamless copper lug made of 99. 9% pure conductive ETP copper. One piece tongue not sandwiched make them more conductive than a typical copper lug.

Crimp Supply Ultra-Flexible Car Battery/Welding Cable - 2 Gauge, 25 Feet Red/25 Feet Black - and 5 Copper Lugs #ad - Clearly marked for wire size. 1-3 day delivery. Cable made in the USA. Includes 5 seamless copper lugs with 3/8" stud. Highly flexible edpm jacket which resists abrasion, cut, tear, flame, grease, oil, and water. Copper Ring Terminal.

More information about Crimp Supply #ad


Similar products



10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches

#ad
Yescom #ad - Contents: package includes 1 set of abn jumper Cables 25' Feet, 2-Gauge, 600 AMP and 1 carrying storage bag. Perfect for 8000 lbs to 13000 lbs Winches. 10" on center Fairlead Bolt Pattern. With constructed of 1/5" powder coated steel, the mounting plate ensures high quality and durable use. Features:- 10" x 4-1/2" standard winch mount pattern- 10" on center fairlead bolt pattern- made of 1/5" steel- anti-rust black Powder Coat Finish- Perfect For 8000 lbs to 13000 lbs Winches- Cradle Winch Mount Style- Hitch Pin and Clip IncludedPackage Includes:- 1x Mounting Plate- Hitch Pin and Clip Copper Ring Terminal.

2 gauge 3/8 Inch. Storage bag: convenient carrying bag that prevents tangling and keeps your cables safe and organized; Cables fit inside any vehicle, so you can take them with you while traveling anywhere. Practical: be prepared with the abn jumper cables with carrying bag, 25' Feet, 2-Gauge, 600 AMP - Commercial Grade Automotive Booster Cables for Any Vehicle so you can safely boost jump your vehicle whenever need.

10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches #ad - Easy to use: color identification of cables prevents crossing of wires; Red + Black -; Tangle-free cables; For RVs, tractors, buses, semis. Durable: heavy-duty 2-gauge cable constructed with solid copper clamps to administer optimal contact; Serrated jaws; High-tension parrot clamps; Non-slip rubber coating offers a secure connection grip; For use in all weather conditions.

Ships same business day. This winch mounting plate with a 2" receiver hitch is a heavy duty plate designed to mount a self recovery winch to your vehicles. 1-3 day delivery.

More information about Yescom #ad


Similar products



Forney 57637 Lug Crimping Tool

#ad
Forney 57637 #ad - Contents: package includes 1 set of abn jumper Cables 25' Feet, 2-Gauge, 600 AMP and 1 carrying storage bag. 10" on center Fairlead Bolt Pattern. We're committed to your success regardless of location size or needs. Founded in 1932, forney offers more than 5, 000 products for the hardware, automotive, farm and ranch and do-it-yourself markets.

Reversible and spring loaded. Storage bag: convenient carrying bag that prevents tangling and keeps your cables safe and organized; Cables fit inside any vehicle, so you can take them with you while traveling anywhere. Claims for warranty must be made within 90 days of the date of purchase. Hammer type cable lug crimping tool.

Forney 57637 Lug Crimping Tool #ad - Crimps cable lugs from #6 american Wire-Gauge AWG to #3/0 AWG. The forney 57637 cable lug crimping Tool is a hammer type cable lug crimping tool that is spring loaded. Copper Ring Terminal. 1-3 day delivery. Cable made in the USA. Includes 5 seamless copper lugs with 3/8" stud. Highly flexible edpm jacket which resists abrasion, oil, cut, tear, flame, grease, and water.

Made of 1/5" Steel.

More information about Forney 57637 #ad


Similar products



50' 25' Blk, 25' Red 2 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA - TEMCo WC0180

#ad
TEMCo #ad - Perfect for 8000 lbs to 13000 lbs Winches. Anti-rust black Powder Coat Finish. Rohs Compliant. Resistant to cuts, abrasion, water, Oil, Tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. 1-3 day delivery. Cable made in the USA. Includes 5 seamless copper lugs with 3/8" stud.

Highly flexible edpm jacket which resists abrasion, oil, flame, tear, grease, cut, and water. Made of 1/5" Steel. A paper separator is utilized to enchange stripability. In addition to welding applications, temco easy-flex welding cable can also be used in car audio & golf cart wiring, solar & battery installations, RV & inverter wiring, battery banks and any other use that requires rugged, highly flexible cable.

Note: if more than 1 length of wire is bought, 99% of the time it will be shipped on the same roll. Practical: be prepared with the abn jumper cables with carrying bag, 25' Feet, 2-Gauge, 600 AMP - Commercial Grade Automotive Booster Cables for Any Vehicle so you can safely boost jump your vehicle whenever need.

50' 25' Blk, 25' Red 2 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA - TEMCo WC0180 #ad - Easy to use: color identification of cables prevents crossing of wires; Red + Black -; Tangle-free cables; For RVs, tractors, buses, semis. Durable: heavy-duty 2-gauge cable constructed with solid copper clamps to administer optimal contact; Serrated jaws; High-tension parrot clamps; Non-slip rubber coating offers a secure connection grip; For use in all weather conditions.

Feet markings are indicated on the jacket of the wire. 10" on center Fairlead Bolt Pattern.

More information about TEMCo #ad


Similar products



10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches

#ad
ego #ad - Crimps cable lugs from #6 american Wire-Gauge AWG to #3/0 AWG. Ships same business day. 2 gauge 3/8 Inch. Perfect for 8000 lbs to 13000 lbs Winches. Resistant to cuts, abrasion, Oil, water, Tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. 10" on center Fairlead Bolt Pattern.

With constructed of 1/5" powder coated steel, the mounting plate ensures high quality and durable use. Practical: be prepared with the abn jumper cables with carrying bag, 25' Feet, 2-Gauge, 600 AMP - Commercial Grade Automotive Booster Cables for Any Vehicle so you can safely boost jump your vehicle whenever need.

10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches #ad - Easy to use: color identification of cables prevents crossing of wires; Red + Black -; Tangle-free cables; For RVs, buses, tractors, semis. Durable: heavy-duty 2-gauge cable constructed with solid copper clamps to administer optimal contact; Serrated jaws; High-tension parrot clamps; Non-slip rubber coating offers a secure connection grip; For use in all weather conditions.

Annealed 30 gauge bare copper conductor. Nominal od: 0413", conductor stranding: 624/3010" x 4-1/2" standard Winch Mount Pattern. 205 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F.

More information about ego #ad


Similar products



Bumper Hitch Receiver Winch Mount Mounting Plate - by Driver Recovery Products

#ad
Driver Recovery Products #ad - 10" on center Fairlead Bolt Pattern. Annealed 30 gauge bare copper conductor. Nominal od: 0413", conductor stranding: 624/30 Temco easy-flex has a rugged epdM jacket and is highly flexible. Storage bag: convenient carrying bag that prevents tangling and keeps your cables safe and organized; Cables fit inside any vehicle, so you can take them with you while traveling anywhere.

Handle length: 7-1/8". Perfect for 8000 lbs to 13000 lbs Winches. 205 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Resistant to cuts, abrasion, Tears, water, Oil, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Pack of mounting hardware included.

Bumper Hitch Receiver Winch Mount Mounting Plate - by Driver Recovery Products #ad - Perfect for 8000 lbs to 13000 lbs Winches. Anti-rust powder coat finish. Two removable side guards protect your winch motor and double as handles, allowing for convenient winch removal/installation. Super-duty construction; fabricated from a single piece of ultra-high tensile strength, 3/16" steel plate. Reversible and spring loaded.

Mounting channel is drilled with two bolt patterns allowing for custom mounting applications and compatibility with most every winch brand; a standard 10" x 4-1/2" pattern, and a 6-1/2" x 4-1/2" pattern.

More information about Driver Recovery Products #ad


Similar products



Goplus 10" x 4 1/2" Cradle Winch Mounting Plate,15000 Lb Capacity, Winch Mount Recovery Winches

#ad
Superbuy #ad - 10 pack. Standard 10" x 4-1/2" winch mount pattern. Rohs Compliant. 10" x 4-1/2" standard Winch Mount Pattern. Hammer type cable lug crimping tool. Reversible and spring loaded. 10" on center fairlead Bolt Pattern The handles are not adjustable. Anti-rust black Powder Coat Finish. Anti-rust black Powder Coat Finish. Don't hesitate to buy one now! Notice:More detail size view the picture.

Please check before purchase! Copper Ring Terminal. Folding size:16. 5"x14. 8"x6. 6"lxwxh. This is our brand new winch Mounting Plate which is heavy duty and is designed to mounting a self recovery winch to your vehicles. Resistant to cuts, water, Oil, Abrasion, Tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards.

Goplus 10" x 4 1/2" Cradle Winch Mounting Plate,15000 Lb Capacity, Winch Mount Recovery Winches #ad - Practical: be prepared with the abn jumper cables with carrying bag, 25' Feet, 2-Gauge, 600 AMP - Commercial Grade Automotive Booster Cables for Any Vehicle so you can safely boost jump your vehicle whenever need. Easy to use: color identification of cables prevents crossing of wires; Red + Black -; Tangle-free cables; For RVs, tractors, buses, semis.

Durable: heavy-duty 2-gauge cable constructed with solid copper clamps to administer optimal contact; Serrated jaws; High-tension parrot clamps; Non-slip rubber coating offers a secure connection grip; For use in all weather conditions. Anti-rust powder coat finish.

More information about Superbuy #ad


Similar products



Install Bay Copper Ring Terminal 2 Gauge 5/16 Inch 10 Pack - CUR2516

#ad
Metra Electronics Corp CUR2516 #ad - Ideal for 8000 lbs to 13, 000 lbs winches. 10 pack. Copper ring terminal 2 gauge 5/16 Inch 10 Pack Copper Ring Terminal. 10" on center Fairlead Bolt Pattern. Cradle Winch Mount Style. Temco easy-flex has a rugged epdM jacket and is highly flexible. 10 pack. Contents: package includes 1 set of abn jumper Cables 25' Feet, 2-Gauge, 600 AMP and 1 carrying storage bag.

Annealed 30 gauge bare copper conductor. Nominal od: 0413", conductor stranding: 624/30 Crimps cable lugs from #6 american Wire-Gauge AWG to #3/0 AWG. Made of 1/5" Steel. Hitch pin and clip Included. Storage bag: convenient carrying bag that prevents tangling and keeps your cables safe and organized; Cables fit inside any vehicle, so you can take them with you while traveling anywhere.

Install Bay Copper Ring Terminal 2 Gauge 5/16 Inch 10 Pack - CUR2516 #ad - 205 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. 10" x 4-1/2" standard Winch Mount Pattern. 1-3 day delivery. Cable made in the USA. Includes 5 seamless copper lugs with 3/8" stud.

More information about Metra Electronics Corp CUR2516 #ad


Similar products